Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

A plate groove

Posts

A plate groove

#1

A plate groove

jim_reed@marietta

>Sometimes the small touches make a nice piece of furniture better. I have added plate grooves to the shelves of my cupboard. It requires a V groove with one side about 80 degrees and the other at about 40 degrees. I started with my #45 and 1/8" blade. Worked the back side with a #92 and the inside with a set of #98/99. The curls are from the #45 and the wisps are from the #98/99 pair.


img

Re: A plate groove

#2

Re: A plate groove

Bill Houghton, Sebastopol, CA

>Very nice, and a multi-part driveby gloat thrown in for good measure!

I did a similar tilted groove once by setting a fence on the stock and tilting my No. 78 against it to get a 90-degree V-groove going, which I then deepened with a narrow iron in the 45, with no fence. It was not splayed on both sides like yours, though.

Re: A plate groove

#3

Re: A plate groove

Bill Murphy / Reading Pa.

>Very nice indeed.

I just realized one of the reasons that I'm being drawn to hand tools...it's the shavings and those ultra-light wisps.

Working with hand tools is like making music that you can see, feel and smell. What's not to love about it?

Thanks for posting that great picture.

Life is good.

Bill/Reading,PA.