Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Rehandling Japanese chisels question

Posts

Rehandling Japanese chisels question

#1

Rehandling Japanese chisels question

Paul M. in San Diego

>Does anyone know of a source for info on rehandling Japanese chisels? Bob has done several wonderful articles on rehabbing tools, but I can't find any links in a search specifically for rehandling the tanged Japanese chisels. I have an old mortise chisel that has a beat up handle that would be a good one to learn on.

Thanks,

-- Paul M.

Re: Rehandling Japanese chisels question

#3

Re: Rehandling Japanese chisels question

Paul M. in San Diego

>I got a beat up but salvagable mortise chisel off ePay just because I thought it would be a fun project. It would be quite silly to buy a beater chisel for $5 and then pay a bunch more than that to get it rehandled. But thanks for the link as I didn't know they did service work on tools too. I've bought several things from JWW in the past, and have been very satisfied.

Re: Rehandling Japanese chisels question

#4

Forgot somethin... *LINK*

Scott Burr in Ben Lomond CA

>Look into care and feeding section it shows how they come apart. Also I believe you can buy handles from them (could be wrong here, it might be Hida tool). If your without lathe or tools that make wood round.


Hida Tool

Re: Rehandling Japanese chisels question

#5

Re: Forgot somethin...

Paul M. in San Diego

>Thanks Scott,

I found the disassembled drawing on the JWW site. I do have a lathe, so this shouldn't be too difficult. The ferrule is pretty toast, so I'll have to find a replacement one, but the wood part of the handle should be easy.

I also found a page on how to care for Japanese kitchen knives on the same page. I got one of these at an old tool swap-meet a while back, and found that you have to treat these quite differently than stainless knives. It's amazing how fast rust forms on these knives!