WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

Rust hunters tool or just plane nuts?

Posts

Rust hunters tool or just plane nuts?

#1

Rust hunters tool or just plane nuts?

Ernie Miller Topeka

>I was at a garage sale today and they have a protable dish washer FREE for the taking and it works. So I'm thinking that it might be just the ticket pre wash cleaning tools it has the heated dry cycle which should help some. I can set it up right next to the slop sink in the room ajasent to the shop. There is all that crap than just needs a good cleaning to make it look like a million bucks. What do you think should I get it or let it pass.

Re: Rust hunters tool or just plane nuts?

#2

Here I am thinking...

Scott in Douglassville, PA

>...that "just plane nuts" was a clever pun.

Get the thing - you can always find a use for it later...

Re: Rust hunters tool or just plane nuts?

#3

Re: Here I am thinking...

Todd O. Cronkhite Native of Maine

>Get it! Gracious sakes alive man, if nothing else it can be used for trading stock later on.

I got robbed today myself. I was headed off to school and I saw a nice hose reel in the trash. Had to go a few blocks down to turn around, and as I was coming back to it I saw another guy picking it up and tossing it into his truck. :~(

Ahhhhhhhhhhh well, Momma said there'd be days like this.

Todd O.

Re: Rust hunters tool or just plane nuts?

#4

Jim in Burlington Ont.

Using power tools to Clean hand tools

Jim in Burlington Ontario

>

Re: Rust hunters tool or just plane nuts?

#5

Marginal cost

Bill Houghton, Sebastopol, CA

>What does your local landfill charge, if anything, for appliances? Ours charges $10, more if they have freon (yeah, I know: what's the disposal cost of an appliance, when they'll take an equal weight of metal in the non-appliance form free?), and I'd hesitate to take on an appliance unless I knew I had a use for it. But that may not be your situation, Ernie.

Re: Rust hunters tool or just plane nuts?

#6

Bad news Todd

Bob Hackett

>I`ve been doing some research on your blaster post and while paging thru old issues of Home Shop Machinist I came across a tip that suggested using a dishwasher cabinet as a blast cabinet.They even recomended using the door switch as a safety interlock to the gun by wiring it into a solenoid valve.Three holes in the door,for a window and a pair of gloves and you could be in business chum!These things do come with thier own parts racks ya know.Let me know if you want more info.

Mainely,Bob

Re: Rust hunters tool or just plane nuts?

#7

Re: Rust hunters tool or just plane nuts?

Tom MacGregor, Vermont

>I can't imagine passing up a free toy. I wonder if you could set it up to use & recycle a non-flammable water based degreaser? Might not want to use the heat cycle with that stuff. I'd just set it up far enough away from the house to test it without messing up anything but a patch of weeds if it goes ka-blooey. But then again, I live far enough away from the neighbors to get away with strange experiments. After the first few times they start to ignore loud noises, bright flashes and funny colored plumes of smoke.

Re: Rust hunters tool or just plane nuts?

#8

Re: Rust hunters tool or just plane nuts?

Don Thompson, Cutler Ridge, South of Miami FL

>I found a combination clothing washer/dryer, and it works just fine for cleaning old tools. I just throw a cup full of naval jelly in with each load.

Re: Rust hunters tool or just plane nuts?

#9

Re: Rust hunters tool or just plane nuts?

Frank Mutchler in Colorado Springs

>Geez, I dunno, Tom. Given todays terror alert we may be reading about "Terrorist Tom" brought to bay in Vermont's outback by vigilant neighbor :>))

Police say he claimed he was cleaning his tools in a washing machine....yeah, right :>)!!

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.