Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Why they call it rust hunting- revisited

Posts

Why they call it rust hunting- revisited

#1

Why they call it rust hunting- revisited

Dale Stansbery

>As Found



Geez, I hope I got the polarity right


Into the oven to thoroughly dry, and get rid of that nasty mythical HE in the blade



And finally, after making a few nice walnut curlies



I ended up with a pretty nice Type 6D 1922-23 603 plane with usable sweetheart blade and 80% plus japanning. Only one noticeable pit on a cheek and a couple on the sole, but in non critical areas. With a few strokes of the blade on 320 sandpaper, I was making nice walnut curls, not even really sharp, but I couldn't wait to try it.

This plane took a lot less effort to clean up than I had anticipated.

Re: Why they call it rust hunting- revisited

#2

Re: Why they call it rust hunting- revisited

dominic palazzola

>wow your parts came out looking better then mine,, how long did you leave it in the bath and do you use baking soda or lye?

thanks

Dom

Re: Why they call it rust hunting- revisited

#3

Re: Why they call it rust hunting- revisited

Dale Stansbery

>Dom, I use Armand Hammer Washing Soda, and left it in almost 24 hours. The nice thing about electrolysis is once the rust is converted to what ever it is converted too, nothing else happens, so it's almost impossible to leave it in too long. After removing it from the bath, I had to scour the heck out of it with a stiff plastic scouring pad, and a plastic brush for the tight corners that removed the black scale. After drying, I used 320 wet dry sandpaper with WD 40 to go after the last layers grunge, and the result is what you see. I prefer to leave some of the patina on the sides and don't take them to bright steel. I will eventually lap the bottom some to smooth up some scratches and check for flatness at the critical areas, though it's planing pretty well right now.

Re: Why they call it rust hunting- revisited

#4

Re: Why they call it rust hunting- revisited

Don Thompson, Cutler Ridge, South of Miami FL

>I would NEVER have bought a plane that looked that rusty. I cannot believe how well it turned out! I would not have thought that the japanning would hold up on such a badly rusted plane.

Good work.

Re: Why they call it rust hunting- revisited

#5

24 Hours!?

Todd O. Cronkhite Native of Maine

>Bloody He!! Dale, you don't have to leave it in that long. Next time you zap something do this: Zap it for 30 MINUTES, remove from bath and RINSE THE ITEM WITH BOILING WATER. In 10 seconds the water will have evaporated off and the rust will have turned to dust which will brush right easily. Trust me one this one Dale. Holy Tomoly man, 24 hours is Waaaaaaaaaaaay to much time for one tool. In a afternoon I can do a dozen tools or so easily. Sometimes I'll do 2 or 3 at a time if they are small ones. I use Washing Soda also. Baking Soda works, but nowhere near as good as Washing Soda.

Todd O.