Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Keen Kutter back saw question

Posts

Keen Kutter back saw question

#1

Keen Kutter back saw question

Ryan Selberg in Salt Lake City

>I mentioned in an earlier post that I had acquired a very nice Keen Kutter back saw, a 14" steel backed saw with a beautiful fruitwood handle, and the Keen Kutter/EC Simmons medalion. My question remains: who made the saw for EC Simmons, or did they have their own manufacturing plants, as they produced a variety of tools? It is in need of jointing and sharpening, but should be a nice user.

Ryan

Re: Keen Kutter back saw question

#2

Re: Keen Kutter back saw question

Jim Crammond in Monroe, Mi

>Ryan,

According to Erv Schaffer's "Hand Saw Makers of North America", Keen Kutter saws distributed by E. C. Simmons, a large hardware wholesaler from St. Louis, were made by Disston.

Jim Crammond

Re: Keen Kutter back saw question

#3

Re: Keen Kutter back saw question

Tom Huett

>I saw this request for info earlier, and wanted to know what others thought. Here is my 2 cents worth. Some of you may remember that I bought a combination backsaw a while back (one of those made by Bishop)that you can reverse the blade in order to cut either rip or crosscut. After cleaning the saw some, I found a Keen Kutter etch on the blade. I know that Disston made a saw like this but the one that I have is definitely a Bishop. SO, it appears that at least some of the saws made for Keen Kutter were made by Bishop.

Tom