Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Bandsaw blade question

Posts

Bandsaw blade question

#1

Bandsaw blade question

Clementine

I have a 14" Ridgid bandsaw and need a 93.5," 1/4" blade. Occasional and general use only. $30 or so. Timber Wolf and Starrett look like solid choices. I saw that the big box stores sell Bosch for about $10 to $12. I always thought Bosch products were very good quality, but this price makes me wonder. Any input would be appreciated (Please, no fighting or name calling).

Re: Bandsaw blade question

#2

Re: Bandsaw blade question

Michael van pelt

I believe you will find that “Bosch” just put their name on the box! I believe they do not manufacture the blade themselves. It likely will be a low end quality blade. I am a big fan of the TimberKing, Olsen, and Carter! Good Luck and happy woodworking!

Re: Bandsaw blade question

#3

Re: Bandsaw blade question

Bill Tindall, E.Tn.

I pay less than $10 that to have them welded up at Misenheimer from Starrett or Lenox stock rolls. Blades that long should not cost $30.

Re: Bandsaw blade question

#4

Re: Bandsaw blade question

Mark Nowicki

I pay about $16 (Canadian) for Olson blades. They work fine.

Re: Bandsaw blade question

#5

Re: Bandsaw blade question

Don Stephan

Just like band saws, hammers, and hamburgers, different choices will have different prices depending on many factors.

I like Timberwolf/Suffolk, because they have several different tooth designs for different applications (green wood, thin plywood, thick dry hardwood, et cetera).

An oft repeated line is ask 10 woodworkers their favorite brand of chisel, tablesaw blade, or bandsaw blade, and you might get 11 different responses.

Identify the type of material you want to cut, the material thickness, and the tightest radius, and then find a suitable tooth design and blade width.

Re: Bandsaw blade question

#6

JL

Re: Bandsaw blade question

JL

It can also depend on what your intended use might happen to be.

I like Delta and Timberwolf for 1/4" blades that I use for cutting on my 14" Delta.

I prefer the wider Timberwolf or Wood Slicer if I am trying to resaw on my 14" Delta.

Re: Bandsaw blade question

#7

Check the Woodcraft link in Marketplace Please

Clementine

I'm going with the Timber Wolf at Woodcraft. I tried the Marketplace link:

PLEASE VISIT OUR MAJOR SPONSORS

CLICK THE BANNER TO VISIT THEIR WEBSITE

Nothing worked, so I got my son who speaks computerese and he said it's the web page, not my computer. If someone could look into this, I would be glad to go through WoodCentral.

Re: Bandsaw blade question

#8

Re: Check the Woodcraft link in Marketplace Please

Brad Chenoweth

I just checked and it worked fine for me on both my phone and computer. My guess is it may be your browser. I use either Firefox or

Microsoft Edge.

Brad

Re: Bandsaw blade question

#9

Google "Timber Wolf blades dull quickly"

Dick Coers

You'll find quite a few unhappy customers.

Re: Bandsaw blade question

#10

Bimetal only

Derek Cohen (in Perth, Australia)

Clementine, seek out a bi-metal (HSS) blade. These will last several times that of the cheaper, carbon steel blades.

Others here - Bill ? - can probably provide sources. These cost a little more, but make up for it over time.

Regards from Perth

Derek

Re: Bandsaw blade question

#11

Banner update

Clementine

The banner link works just fine with Microsoft Edge. Still not working with Firefox - probably some little box hidden somewhere that needs checking. Ignorance is bliss until it's challenged.

Re: Bandsaw blade question

#12

When I had a bandsaw...

David Weaver

..I used bimetal and timberwolf blades. The timberwolf blades need to be sharpened regularly, but they weren't in a constant state of "sort of dull, sort of sharp" that bimetal are.

I didn't like their value proposition at first (they're better than cheap carbon steel blades for durability, etc, but not like bimetal or carbide). Once you learn to sharpen them quickly with a burr, they'll pretty much last as long as the band lasts without needing commercial attention of any type.

Re: Bandsaw blade question

#13

Rockler 30% off bandsaw blades

Michael van pelt

Just got an email. Rockler has selected bandsaw blades Olsen 30%off.

Re: Bandsaw blade question

#14

Re: When I had a bandsaw...

Derek Cohen (in Perth, Australia)

David, I sharpen all my own bandsaw blades - carbon steel, HSS and carbide - have done so for many years. Bimetal get very sharp, as sharp as carbon steel if you sharpen correctly. They last many times longer than carbon-manganese steel, such as Woodslicer, which I had the misfortune to purchase.

Regards from Perth

Derek

Re: Bandsaw blade question

#15

never had one of those...

David Weaver

..woodslicer - never purchased one.

Most of our woods here don't really demand bimetal, though it's stylish for people here who don't want to learn to maintain anything. It'll probably also be limited by band life.

I no longer have my bandsaw, but it wasn't as nice as yours and it preferred the timberwolves (probably due to additional set - it wasn't accurate enough to do without it).

At any rate, within 3 or 4 sharpenings "bang", and that was the end of that.

Re: Bandsaw blade question

#16

Misenheimer

Yonak

Bill, does Misenheimer do business on-line or they mostly a local source in your area ? If one can do business with them on-line, I haven't been able to figure out their website. Do you use it ?

Re: Bandsaw blade question

#17

Re: Misenheimer

Bill Tindall, E.Tn.

They are not far away. I usually just go there. Sometimes I have mailed stuff to them. Their phone is: 423 587 4300 But, everywhere will have a saw shop or welding shop that welds up blades.

Re: Bandsaw blade question

#18

Re: Bandsaw blade question

John K Jordan

>>> Clementine 3/14/2020, 5:38 pm



If you are interested in a local supplier state your secret location and someone may have a suggestion. There is a very good bandsaw blade shop in Knoxville TN near me.

JKJ

Re: Bandsaw blade question

#19

Re: Bandsaw blade question

Wiley Horne

Here’s one that will be delivered to your door:

https://www.amazon.com/Olson-FB14593DB-6-TPI-Blade-2-Inch/dp/B0031JUM50/ref=sr_1_7?dchild=1&keywords=Bandsaw+blade+93.5&qid=1584306198&sr=8-7

I like the Olsen blades. If 6tpi is too many, you can get 3- and 4-tpi blades from the same source, but they will be 3/8” or 1/2” wide.

Wiley

Re: Bandsaw blade question

#20

Mail order Lenox (they have 1/4”)

Wiley Horne

https://www.bandsawbladesdirect.com/lenox-flex-back-carbon-steel-band-saw-blades

Wiley

Re: Bandsaw blade question

#21

Re: Check the Woodcraft link in Marketplace Please

AZ in Colorado Springs

Timberwolf blades are made by Suffolk machinery. Look them up and call them (you don't order the blades on line). They're about 1/3 the price of woodcraft that way. They arrive wrapped in newspaper in a flat rate USPS box.

Re: Bandsaw blade question

#22

Fixed the link

Clementine

The computer son did a second look at my Firefox and found where there was an ad blocker to prevent unwanted ads from popping up almost constantly. That works fine for watching YouTube, but it was also restricting things like banners on this site. He clicked "something" to allow the Wood Central banner to show, while still blocking ads the way it had been doing - the best of both worlds.

Thanks for all the good advice and recommendations.

Re: Bandsaw blade question

#23

Re: Firefox privacy settings

Martin

I have similar problems with Firefox and I found it was due to the privacy settings. I have mine set to

10 on a scale from 1 to 10. This is driven by my companies extreme and strict internet policies.

The far right menu in the Firefox window, the three horizontal bars, open and go to the Options

selection, there is a gear looking icon next to Options. A new window opens, then go to

Privacy & Security option with the Lock icon. There is Standard, Strict and Custom. Mine is

Custom and every box is checked.

I have to revert to Standard for some of my companies websites to bring up optional window type

menus that appear on the web page. If I use Chrome or Internet Explorer I never seem to have a problem.

I also have a few pop up blocker addons in Firefox. However, when I roll back to Standard for Privacy &

Security, I have no problems with optional window type menus.

Re: Bandsaw blade question

#24

Re: Google "Timber Wolf blades dull quickly"

David Weaver

I recall that being a big problem that some had when I got mine. That's what led me to buy a defective $175 Laguna carbide tipped blade. The feedback from others was so positive that I always figured it might be me until I sent the blade to someone else. I tried and tried to figure out a way to use it, even just for ripping, but it wasn't made right and had no set and would bind itself in the guides on a low height cut.

Can't well go back to a salesperson at Laguna who had quit by then and tell them the story that you tried to make their stuff work but it was no good. That saws wheel turned out to be out of round, too, but it's long gone. I never measured just how much until the buyer was in my shop, which resulted several hundred more to compensate for the fact that he'd want to pay someone to fix it.

I may have been unhappy with the tw blades had I not taken to sharpening, but they cut the nicest of all of my blades and sharpening sort of made their life a non issue.

I'm sure they're not a great deal for most in the market but their extravagant cost turned out to be one of the least expensive lessons with the whole experience of that saw.