Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Bit Slips in Collet

Posts

Re: Bit Slips in Collet

#26

Example.

Virgil Johnson

Example. I did this tonight just coloring the collet OD with a marker. The pic below is my Porter Cable 6902 with a 1/4 collet and a bit that mics .249"

The black marks (on the inside of the spindle) are even at the top and bottom of the spindle. The rubs marks are even on the collet.

Re: Bit Slips in Collet

#27

Good idea, Virgil. I'll try it.