WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

Wood ID help please *LINK*

Posts

Wood ID help please *LINK*

#1

Wood ID help please *LINK*

Keith Newton

About ten years ago I built a lot of cabinets for friends restoring an old house. In the wife’s master closet, I used some veneer 3 ply sheets that I had gotten in a mixed pile of mystery veneers. Now they are selling the house and want to know all the woods for the realtor listing.

I knew at the time what the birds-eye looking veneer in the panels was, but it’s lost too far back in the cobwebs now. It seems like it was some sort of Norwegian Birch. What do you think? I’m in bad need of a head slap to smooth out my furrowed brow. ;-)


https://www.dropbox.com/s/2ip9q23jak49jdd/DSCF5456.jpg?dl=0

Re: Wood ID help please *LINK*

#2

suggestion

Bill Tindall, E.Tn.

The folks at Certainly Woods are typically helpful. Maybe they could ID the wood if you sent them a picture.

Re: Wood ID help please *LINK*

#3

Thanks Bill

Keith Newton

I've bought from them a lot, over the years. Last night I went through all the menus and didn't find it, but didn't think about contacting them.

I guess I should go by there and look at it up close. She says she loves her kitchen island so much that she wants me to duplicate it when they build the new house out West, so I'll need to take some detail pics and measurements of that while they still own the place. It was made from figured Bubinga.

Re: Wood ID help please *LINK*

#4

Re: Wood ID help please

William Duffield

Perhaps masur birch, a.k.a. Karelian birch?

https://www.wood-database.com/masur-birch/

Re: Wood ID help please *LINK*

#5

Yes that is it. Thanks William

Keith Newton

I wish I was as smart as you. ;-)

Have you made that diffuser yet?

Re: Wood ID help please *LINK*

#6

Re: Wood ID help please

John K Jordan

Difficult task without a piece of the wood that shows the end grain. Might be reasonable to just pick a likely candidate.

Re: Wood ID help please *LINK*

#7

Clint Searl

Curly Tashoovian ringwort

Clint Searl

Who's gonna know the difference?

Re: Wood ID help please *LINK*

#8

My guess is pomelle sapele


Re: Wood ID help please *LINK*

#9

Re: Yes that is it. Thanks William

Barry Irby

late to the party, but I agree. The minute I saw it I thought Masur Birch. William beat me to it.

Re: Wood ID help please *LINK*

#10

Re: Yes that is it. Thanks William

William Duffield

No, I haven't made the flash diffuser yet, but I'm sure going to. Thanks for the idea, and for the help on close-up photography. Instead of an additional lens, I think I'm going to try some extension tubes first. I've made them work before, many years ago, even with a Pentax with a screw mount, which was much less convenient than Canon's bayonet mount. They also work with lenses with different filter sizes, and don't add any additional lens elements to the light path.

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.