WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

OT- Cordless Phone question

Posts

OT- Cordless Phone question

#1

OT- Cordless Phone question

Tom Norton

We still have a landline and most likely will keep it. There are place in our house where it does not get a good signal. The base station is where it has to be so there is no moving it as it is the home office area. So has anyone had this issue? How did you resolve it?

Thanks!

Re: OT- Cordless Phone question

#2

Re: OT- Cordless Phone question

John McGaw

I've had no problems with my Panasonic cordless and I have four remotes scattered around including in my shop. You say that the master cannot be moved. Why is that?

Re: OT- Cordless Phone question

#3

Re: OT- Cordless Phone question

Tom Norton

Our home office, computer,printer, file cabinets desktop work area are where we use the answering machine/base station.

Re: OT- Cordless Phone question

#4

Re: OT- Cordless Phone question

Ray Mtn. Home Ar.

Got the same Panasonic 6.0 plus with 4 phones.. I can carry one down the basement or out in the pole barn and it works fine. One other advantage, it takes regular recharge batteries. You don't have to spend 15 or 20 bucks for special batteries.

Re: OT- Cordless Phone question

#5

Re: OT- Cordless Phone question

Stuart Johnson

We have been using wifi landline for a few years now. Basically your landline is connected to your router. The connection is to the wire so dead spots is not an issue. I don't know if all providers have this option but ATT and Spectrum do.

Re: OT- Cordless Phone question

#6

Re: OT- Cordless Phone question

John McGaw

Tom's problem is not with getting telephone service to his house but the inability of the wireless phone system than comes after that to reach everywhere. A wireless phone system (Panasonic or whatever it might be) is pretty much agnostic as to how the connection to the outside world is made - be it old-school copper strung on poles or modern internet-based systems.

Re: OT- Cordless Phone question

#7

Re: OT- Cordless Phone question

Tom Norton

Thanks John you are correct! I would guess there is some kind of internal antenna. Could it be made external? Guess I need an electronic geek!!

Re: OT- Cordless Phone question

#8

Re: OT- Cordless Phone question *LINK*

John McGaw

Yes, there are antennas involved but, operating at 2.4gHz or higher, they are very small and, unless the equipment is designed that way to begin with, going external would be nearly impossible for your average electronics geek (I are one).

If you have a compatible phone system, there is such a thing as a range extender. I've not used one since my regular setup gives more than enough coverage but it might be worth a look:


DECT 6.0 Range Extender

Re: OT- Cordless Phone question

#9

Re: OT- Cordless Phone question

Larry Clinton At Frankfort, (Central) Indiana

Don't know how old your phone system is but there are range extenders for most phones available on Amazon ~ Walmart etc.

I have a Panasonic system about 4 yo, one of my extension phones is in my Workshop, about 75 foot from the main phone. I have zero problems with it, I can carry one of my phones to any place on my property (city lot about 140' X 75' with no loss of signal.

If you have a very old system it may pay to replace it ~ cost has really lowered in the last few years. Mine was about $140 for Base station + 4 remote phones!

Re: OT- Cordless Phone question

#10

Re: OT- Cordless Phone question

Bill Howatt

If you don't need the features of having all the phones connected to the same base unit, you can just add another wireless phone and its base unit to the line assuming you can have a line put near the problem area.

Bill

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.