Questin for Mark Hennebury...

Re: Questin for Mark Hennebury...

Mark Hennebury

Call or email me if you need any help with the machine. They are great machines, but are old and can have a few problems, like any old machines.

Re: This place is amazing!

Perfect!

John in NM

Thanks Mark!

I've been after one of these machines for quite a while, available machine and available cash finally lined up

Re: Perfect!

Mark Hennebury

The machines do a great job, fast and accurate. A bit of a learning curve, but once you get used to it its a piece of cake.

One of the things that you may have to do is refill the oil in the feed unit, if it is not feeding smoothly. I can guide you through that process, as bleeding the air can be a pain if you don't do it the correct way. Adjusting the throw on the chisel can be a little confusing at first also. Lots to learn.

Anyway if you have never used one before, you will probably have a lot of questions. when it arrives and you get a chance to look it over, call me and i will help you sort it out.

Re: Perfect!

John in NM

I'll definitely have questions, so you'll be hearing from me. I appreciate your willingness to help!