Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Lowered my Jointer

Posts

Lowered my Jointer

#1

Lowered my Jointer

john lucas

My jointer was tall enought that I had to lower the fence to a 45 degree angle to cut long boards on the table saw. Well I put new wheels under my table saw which lowered it. So I decided it was time to do something. I cut 2 1/2" off the legs on the jointer stand. Now I can cut long boards on the table saw and it clears the jointer. I like having the jointer on the left side of the table saw. It makes it very fast to cut and joint boards when it's in this position. Plus it seems to take up less room in the shop.

Re: Lowered my Jointer

#2

Re: Lowered my Jointer

John McGaw

Good luck. But I have twinges starting in my back just looking at how low the tables are. Can you really work with a heavy long board bending over the jointer?

Re: Lowered my Jointer

#3

Re: Lowered my Jointer

john lucas

It's not that short and I'm short so it works out well for me.

Re: Lowered my Jointer

#4

Re: Lowered my Jointer

Brian D

I'm curious. Why not wheels and just have the ability to move it around a bit?