Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Laminated door question

Posts

Laminated door question

#1

Laminated door question

Barry Irby

Someone has asked me to remake a cabinet door. The door is about 20" by 18" and about a 1/2" thick. It has what appears to very thin plastic laminate (Formica?) on both sides. One side is maple looking stuff and the other is nondescript brown. The edges are square and brown. Oddly, they used the maple side as the inside. I know that because it has Euro style cup hinges drilled into that side. One corner is broken off and the guts of the door is particle board.

Any thoughts? I suspect the doors were cut out or larger sheets that were factory laminated. I did not know you could install cup hinges on door that thin. I am considering using MDF and laminating vertical grade maple Formica on one side only. And I will let the painter stain and finish the other side in brown.

I have checked around and cannot find factory laminated sheets. The problem is they want one door and I would have to buy entire sheets of laminate and substrate.

This reminds me of the laminated the table top that came up the other day. Can I cover one side only? It will warp won't it?

Re: Laminated door question

#2

Re: Laminated door question

Pete in Holland MI

You'll have to put a laminate on both sides, else warpage will be an issue. Paint won't work.

Project owner has a choice to make:

1) If the door is to be exactly like the broken one, the cost of both laminates will have to be figured in.

2) If the door can tolerate an inside color different that the original, then that means only one color of laminate is needed.

No easy/cheap way around it, unless there is a cabinet shop near by with a bunch of small shorts of laminate in stock.

Re: Laminated door question

#3

Re: Laminated door question

C John Hebert

This is one of those jobs you just walk away from. You will never please the customer in the end, and will lose money trying to accomplish the impossible. Almost all these laminates are factory made by the manufacturer and is why you'll never match it. Best just to say your to busy to takle this job in a nice way and avoid the headaches.

Re: Laminated door question

#4

Thanks.....

Barry Irby

Pete, you have hit the nail on the head. IF I can find a sheet of pre-laminated stuff it will be expensive. IF I have to buy sheets of laminate and backer, it will be expensive because I only need about 1/8 of a sheet of each. This something that goes into some low rent apartment and I would not even look at it except my buddy asked me to bail him out. But, I am sure they will be shocked at the cost of 8 times whatever they need plus labor. OTOH, I am sure they kept the offending tenant's entire deposit.

Re: Laminated door question

#5

Re: Thanks.....

John in NM

Thought of finding a shop that does a lot of laminate work and asking for scrap? I agree with John though, this is the kind of job that is too big a pain to do even as a favor unless you have just the thing sitting around already.

Re: Laminated door question

#6

Re: Laminated door question

Jesse Cloud

Here's another scenario: explain to him why what he wants would cost so much, suggest an alternative of replacing both doors with something easy to make and inexpensive, maybe mdf painted on both sides....

Re: Laminated door question

#7

Ellis Walentine

Re: Laminated door question

Ellis Walentine

It might not be a lost cause. From your description, it sounds like the nondescript brown material might be Kraft backer, essentially an impregnated paper, which is dirt cheap and standard in the contract furniture industry and production shops. It wouldn't be usual to use it as the show surface, but who knows. Color does vary somewhat, so it might be tricky to get a piece that mimics an existing room full of cabinets. I'd find a local kitchen manufacturer and beg a remnant of backer from them.

Ellis

Re: Laminated door question

#8

Wood-grain melamine, *LINK*

Keith Newton

Is a common material for cheap cabinets. Here is one source I found with a google search using maple wood-grain melamine, 1/2".


https://www.cherokeewood.com/store/hard-rock-maple-melamine/

Re: Laminated door question

#9

Re: Wood-grain melamine,...Thanks agin

Barry Irby

You might be on to something, this might be melamine sheet. The place you sent was in California, so even if they had it the shipping to VA would be killer. But now I have a new area to search. Been looking around in this end of the country and have not found what I want yet, but I will. It dawned on me that I don't really "need" the maple, the brown is the show side.

I talked to my buddy and this is part of a kitchen, so we either have to find a close match or replace a whole set. I will be doing some more poking around today. Its part of an apartment complex and they have lots of these cabinets in many units, He is going to swap one from another unit to get by today for the move in.

And thank you Ellis.