Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

mortise bits

Posts

mortise bits

#1

mortise bits

McKay Sleight

The chisel is relatively easy to sharpen on a 1/4" and 5 /16" hollow chisel mortiser. The bit however, is much more of a challenge. I find that very difficult. Does anyone have a source for just the bits? I would think that somewhere some company would sell just the augar. Thanks in advance.

Re: mortise bits

#2

Re: mortise bits

Brian Holcombe

Even a new one needs filing but both Nakahashi and Fisch sell augers for Japanese style mortiser chisels. For British type you may be out of luck.

I just went through it with hollow chisels.

Re: mortise bits

#3

Re: mortise bits *LINK*

John in NM

I've never seen the inexpensive ones sold as anything but a pair, but the Japanese Star-M & Nakahashi bits are available separately (same manufacturer, different lines).

A few companies import the bits, including Lee Valley and Woodworkers Supply, but Woodworkers is the only one I've seen who sells the augers separately.

These are expensive tools though, might not be worth it just to avoid some sharpening. I've touched the auger up with a small triangular file for the cutting edge and a stone for the spur. Sharpening shops can usually do these augers too.


https://woodworker.com/14-mortising-chisel-and-bit-set-mssu-123-881.asp?search=Mortise%20Chisel%20Bit&searchmode=2

Re: mortise bits

#4

Re: mortise bits

Don Stephan

Hopefully auger files still are sold. Each side only sharpened on opposite surfaces so one one file the various surfaces without notching the adjoining ones.