Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Is there a wood that does not encourage rust?

Posts

Is there a wood that does not encourage rust?

#1

Is there a wood that does not encourage rust?

Barry Irby

In the not distant future I will be getting a nice dovetail saw. I was considering storing it in a wooden "sheath" to protect the blade and teeth. What wood would you use, or would you use wood at all?

Re: Is there a wood that does not encourage rust?

#2

Re: Is there a wood that does not encourage rust?

Don Evans

Not sure what wood would be non reactive but here is another solution. I would definitely stay away from high tannin woods like oak. Maple probably best maybe poplar but I'm not sure of it's tannin content either.

Take a look at this:

https://www.toolsforworkingwood.com/store/item/GT-SBG/Saw_Blade_Guard_-_5_Feet_long#reviews

You can also buy round tubing at hardware store that would work. Problem with that is how to keep it on the blade good enough. The product above appears to be flat so I guess it hugs blade to keep it on.

How about splitting a bike inner tube?

Re: Is there a wood that does not encourage rust?

#3

Why complicate matters?

Gary Smyth

Buy a couple of packets of desiccant and not worry about a box for a saw. The packets are relatively inexpensive, and safe, and can be recharged. The kind used for gun safes are easy to find. Most any container or drawer will work -- for that matter a fine film of sewing machine oil will work and can be wiped away before use.

Re: Is there a wood that does not encourage rust?

#4

Re: Is there a wood that does not encourage rust?

Dick Coers

I would wrap it in VCI (volatile corrosion inhibitor) paper before sliding into the sheath. I'd suggest basswood.

Re: Is there a wood that does not encourage rust?

#5

Re: Is there a wood that does not encourage rust?

William Duffield

Mine are made of baltic birch plywood. You could squirt some camellia oil (or whatever oil you wipe on your saws and planes) in the kerf.

Re: Is there a wood that does not encourage rust?

#7

Re: Is there a wood that does not encourage rust?

Yonak

I cut one out of a scrap piece of poplar for my Nobex mitre saw blade 20 years ago and I haven't seen any rust.

Re: Is there a wood that does not encourage rust?

#8

Just wax.

Derek Cohen (in Perth, Australia)

Just use wax on the metal. I rub on some Renaissance Wax, and then hang up the saw in a till. This works well for me, and the saws are easy to get to.


Regards from Perth

Derek

Re: Is there a wood that does not encourage rust?

#9

ebd

Re: Is there a wood that does not encourage rust?

ebd

I don't sheath my saws but I made sheaths for all of my very fine (and expensive) kitchen knives from Coroplast (corrugated plastic). You just cut it to the appropriate size and slit the corrugation between the sheets and slide in the thing you want to protect. It holds tightly, is light and tough, inexpensive, and won't cause rust.

Re: Is there a wood that does not encourage rust?

#10

Clint Searl

Paulownia