Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Where can I get a dovetail saw sharpened?

Posts

Where can I get a dovetail saw sharpened?

#1

Where can I get a dovetail saw sharpened?

Barry Irby

I got a backsaw/dovetail saw in a junk box at a tool auction. The blade is 10" long and about 2"+ wide below the spine. It's dull and had a hard life. It's Jackson brand. Where can I get it refurbished and sharpened? I don't care about it being pretty, I just want it sharp.

I guess the other question is "Is it worth it?

Re: Where can I get a dovetail saw sharpened?

#2

Re: Where can I get a dovetail saw sharpened?

Mike Jurnigan in Zuni VA

I believe the Woodcraft in Richmond offers tool sharpening service. If you were in this neck of the woods I would push Sure Set in Chesapeake.

Mike in Zuni, VA

Re: Where can I get a dovetail saw sharpened?

#3

Re: Where can I get a dovetail saw sharpened?

Derek Cohen (in Perth, Australia)

Barry, sooner or later you will need to touch up the teeth yourself since saws need to be sharp to work their best (like chisels or hand planes). I would keep your current saw to practice on ... and buy a decent dovetail saw to work with.

Get a Veritas 14 tpi dovetail saw. It is the best bang for the buck in a new saw.

Then watch a couple of videos on Youtube on sharpening, or buy one on DVD.

Here is one by Rob Cosman ((working on good teeth):

https://www.youtube.com/watch?v=R9RTjd2PSzE

and another (more extensive restoration):

https://www.youtube.com/watch?v=ExxTyAF6R_s

Files: double extra slim 4" or 5" needle files work best for the small teeth of a dovetails saw (typically 14-15 tpi).

Saw guide: This aids in maintaining angles. Veritas make a great one. Get this and a few files from Lee Valley while you are purchasing the saw.

You need to make a simple blade holder: see Rob's video

And get a saw set. I have a few vintage models. I like the Eclipse #77 (I think it is). This is a Japanese copy: http://www.leevalley.com/us/wood/page.aspx?p=32956&cat=1,43072,43086

Regards from Perth

Derek

Re: Where can I get a dovetail saw sharpened?

#4

Re: Where can I get a dovetail saw sharpened?

David Bassett

+1

One thing to add, something Mike Siemsen said (on his Naked Woodworker DVD) resonated with me, he said, "a poorly sharpened saw is better than a dull saw". You got your project saw in hand, all you need is the confidence to have at. (And Derek outlined a great plan to succeed.)

Re: Where can I get a dovetail saw sharpened?

#5

Re: Where can I get a dovetail saw sharpened?

Ralph Lipeles

If there is any set left on the teeth you can easily do a crude resharpening with a triangular file. Set the file in a handle or dowel scrap for safety. Next clamp the saw blade, teeth up and horizontal, using 2 scraps, maybe 1 x 1 to better support the blade. Now you can give a shot or 2 on each tooth. I see saw blade vises and saw tooth set tools at the flea markets but for a single sharpening you should be Ok without the special tools.

Re: Where can I get a dovetail saw sharpened?

#6

Re: Where can I get a dovetail saw sharpened?

Barry Irby

I think I need one of the visors or magnifiers to help with both the filing and the cutting of the dovetails. Having a little trouble admitting that.

I tried filing the saw this morning. I was a little timid with that, but the saw really needs work Seeing it better might be depressing.

I think I will take it to Woodcraft. I may also buy a new one there.

I also have a Japanese style pull saw. I may try that.

Re: Where can I get a dovetail saw sharpened?

#7

Re: Where can I get a dovetail saw sharpened?

Don Stephan

A few months ago I stumbled across videos on hand saw refurbishing and sharpening, by Paul Sellers. It takes some time to watch them all, but he makes everything understandable and approachable.

Re: Where can I get a dovetail saw sharpened?

#8

Re: Where can I get a dovetail saw sharpened?

les winter

Hello Barry.

To your original question: you might try Ron Herman (woodworkingwithron on the net). Really straight up guy who is not too pricey. Has some short videos on Youtube. Shows prices on his website.

Cook's Sharpening in New Salem PA still does hand sharpening of saws, but I have not tried them for around 15 years. They too show prices on their website.

From my own experience, starting out saw filing with a dovetail saw is starting out at the hard end. This is particularly so with a saw that has messed up teeth that need to be shaped.

And if you are not used to cutting dovetails with a dovetail saw, I would suggest a professionally sharpened saw to start. Learning to saw dovetails with a saw that doesn't cut straight is a tough row to hoe.

A 5.5 point handsaw from the flea market for five bucks is really an easier saw to get your feet wet with regarding filing.

Hope this helps.