Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

More bed/headboard questions...

Posts

More bed/headboard questions...

#1

More bed/headboard questions...

Barry Irby

I am still thinking about the bed I want to build for my grandson. This will be a adult bed for him, he's only 3 months old, but I figure if I wait for him to grow up, I may not make it, in either sense.

Am considering a starburst pattern in QSWO. A queen sized bed with a large "fan" in the head board. My first thought was to glue up the fan out of tapered pieces and sand it flat and install it in a frame in the headboard.

Second thought was to make the pieces individual with Vee grooves on the edges and align them with Dominoes but not glue them to each other.

Third thought was to resaw the QSWO, either T&G it or ship lap it and install it in the frame loosely.

I have a head board I made many years ago, much simpler, but like the third version and it has held up well in continuous use since I slapped it together thirty some years ago. The pieces are loose enough to rattle a bit.

The new version includes and arched top and the fan will originate in one lower corner. I am considering installing a quarter circle of Yellow Wood (the sun) in the corner. On the foot board, I am considering making the quarter circle out of something white (maple?) to be the moon in the opposite lower corner.

I would appreciate your thoughts, I know we discussed this before, but life has gotten in the way and I am screwing up my courage to the sticking point get started.

Re: More bed/headboard questions...

#2

Re: More bed/headboard questions...

Pete in Holland MI

I wouldn't put too much effort into wildy exotic woods & elaborate detail for a small kid bed. Kids are tough on furniture. Consider that at some point, it'll be drawn on with crayons & markers, covered with stickers, and hammered upon with another toy. A bed design that would appeal to a 2 year old will most likely be shunned by a 15 year old. You can still build a quality piece of furniture, but consider it'll probably have a rough life for the next 10-15 years.

Pete

Re: More bed/headboard questions...

#3

Re: More bed/headboard questions...

Barry Irby

You are correct, but I did not make myself clear, This will be an adult bed. One that will probably live at my house until either he grows up or I pass on. His parents are military and don't want nice stuff to bounce all over the place for the next ten or fifteen years. I want to build the little guy a nice bed, but I don't want to wait for hem to grow up or for his parents to settle down. I guess I could build him a kid bed too. I will ask them if they want one.

Re: More bed/headboard questions...

#4

Re: More bed/headboard questions...

Don Stephan

Starbursts typically are made using veneer on a stable core since wood expands on average 50% more along the growth rings than across them.

Re: More bed/headboard questions...

#5

A third option would be.

Keith Newton

To have a space between the rays rather than joining them, which is what I would suggest. As much as I love QS WO, I don't think it is the ideal choice for a pie cut veneer anything. I have a client whom I'm currently working with that has a table from this, and to my eye, it just doesn't add anything. It's like when I see a kitchen made from quarter and rift, with frame and panel doors, where the construction crew had no sensitivity to such matters, use the QS for styles and rails and rift for the panels. That's just backwards from how I would do it. Ideally the styles and rails need the clean look of the rift, then use the QS with the flakes in the panels.

For the fan, you won't likely be able to match up the ray pattern from one piece to the next, so separating them eliminates that, along with the movement issue.

Also I think it would allow you to drop some weight, by making them a 1/2" or less thick, and possibly take care of your rattling by cutting your mortises oversize, and bonding the ends in something very flexible like a colored latex caulk with silicone, if you prefinished your parts, and mask them well before assembly.

I like the symmetry of Sun and Moon in the corners. I think I would be tempted to stay with the same wood, but use a slight change in hew for each element, rather than changing wood with lots of contrast. The subtle difference will be easier to live with over the long haul.

Also, I'd be tempted to turn a slight rounding face to both orbs on the lathe, and make it in two parts to simplify the assembly. You could cut a rabbit on the back half, and use spacers between pined and glued rays, then cover that with the face piece which gets screwed on from the back with countersunk screws.

Re: More bed/headboard questions...

#6

Now we are talking....

Barry Irby

I had already considered turning the orbs on the lathe. thanks for improving on that Idea.

How much space are you thinking? Not sure I like the see through head board Idea. But I am thinking about it.

I like the idea of the thinner pieces making it lighter.

Re: More bed/headboard questions...

#7

Re: Now we are talking....

Keith Newton

Just for a place to start, maybe 1/4” at the Sun end to maybe 3/4 at the far end, but I would want to play with the parts on the bench until it looks right to you.

Glad you liked my suggestions.

Re: More bed/headboard questions...

#8

thanks again...and

Barry Irby

I must be thinking in slow motion these days. What I am wondering about now is the view of the wall behind the headboard. I think the spaces need to be small enough to keep fingers out, especially with them tapered. I am cogitating about a second layer to block the view and keep even little fingers out.