Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Rust proof cast iron tops

Posts

Rust proof cast iron tops

#1

Jack Guzman from Maine

Rust proof cast iron tops

Jack Guzman from Maine

I have been processing green wood for chair parts. I use the tablesaw to crosscut to length, the bandsaw for various jobs and the lathe to make blanks into legs and other chair parts. The problem is at this early stage the wood contains much water. The problem is mostly at my lathe. I coat it with top-cote but it still stains from water reacting with the iron. Is there something better to coat the iron with? I wipe the tops after use but sometimes things get left. For instance,I have cut a recently turned round on the tablesaw to get a square end and forgot to pick up the cutoff piece right away. The result is a round spot of rust on my top . It doesn't take very long either. So,I need a solution. Any ideas?---Jack

Re: Rust proof cast iron tops

#2

Re: Rust proof cast iron tops

Dick Coers

Don't forget to wipe it down is my solution. David Ellsworth used to advocate a coat of rust on the lathe bed so the tailstock would really grip well. Now they make better hold downs. Maybe you could look at gun bluing or something like that. Because you have a sliding tailstock, it will take almost every coating off sooner or latter.

Re: Rust proof cast iron tops

#3

Re: Rust proof cast iron tops

Don Stephan

When I'm turning green wood bowls I spray WD-40 when the tailstock starts to drag.

Re: Rust proof cast iron tops

#4

Re: Rust proof cast iron tops

Stuart Johnson

Keep it waxed well with a paste wax and call the staining patina.

Re: Rust proof cast iron tops

#6

Re: Rust proof cast iron tops

Denny

Fine Woodworking reviewed products to prevent rust in the July/August 2012 issue. They rated CRC Industrial 3-36 as best overall, clearly better than Topcote. I've never tried it but it might be worth looking into...

Re: Rust proof cast iron tops

#7

Re: Rust proof cast iron tops *LINK*

Jim Dillon

Jack, I've had good luck with Boeshield T-9 on exposed cast iron stuff. Jim


Boeshield T-9

Re: Rust proof cast iron tops

#8

Easy... (and unserious  )

John in NM

Find a Conover lathe!

That's a tough problem Jack, working wet wood is probably harder on iron than being parked next to the ocean!