Turning square table top into round
Bill Tindall, E.Tn.
The universal advice was to use a plunge router, which I don't have. I considered the band saw but the top was too heavy to control even on my large saw table. I have split many feet of pencil line sawing dovetails. Sawing is sawing I thought, regardless of the sawing device.
I did a practice run on one corner and it went well after I installed a new sharp blade. I am finding that the hand tool skills that I develop can be used to guide power tools. So I proceeded to saw out the circle, all 9 feet of circumference. The main struggle was to get good lighting on the pencil line.
Next came smoothing. I have found that a #5 plane is effective for smoothing convex curves like bow front drawers. The table radius was tighter and hence more difficult to plane. The edge was refined with the file. It is easy to feel if the curve is fair and I had only one lump to contend with where I ended the sawing. The smoothing operation took only 15 min to complete.



