Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Lenox Diemaster bandsaw blade 1st impressions

Posts

Lenox Diemaster bandsaw blade 1st impressions

#1

Lenox Diemaster bandsaw blade 1st impressions

Denny

I replaced my worn out Wood Slicer blade with a Lenox Diemaster 2 bi-metal blade. The saw is a Jet 16" that takes 123" blades.

My immediate impression is that the Diemaster doesn't cut quite as smooth as the Wood Slicer, but a few passes with a card scraper cleans things up. On resawing, the blade cut straight, no barreling or drift problems. I tensioned it the same as the Wood Slicer, no problems.

The specific blade I got was a 1/2" x .025 4 tpi hook tooth. The price ($40) wasn't that different from the Wood Slicer ($32). If you're looking for a 3 tpi blade, you have to step up to a thicker band.

Bottom line, if the Diemaster stays sharp for a reasonable time (as expected for a bi-metal blade), I'll probably never buy another Wood Slicer.

Denny

Re: Lenox Diemaster bandsaw blade 1st impressions

#2

ebd

Re: Lenox Diemaster bandsaw blade 1st impressions

ebd

I'm confused. The Diemaster doesn't cut as smooth and costs more but if it lasts as long as a Woodslicer you prefer it? You will spend more to get an inferior cut? I must be missing something.

Re: Lenox Diemaster bandsaw blade 1st impressions

#3

Re: Lenox Diemaster bandsaw blade 1st impressions

Denny

Maybe I wasn't clear, what I said was "Bottom line, if the Diemaster stays sharp for a reasonable time (as expected for a bi-metal blade), I'll probably never buy another Wood Slicer."

A bi-metal blade should last much longer than the Wood Slicer, and only costs a little more.

Denny

Re: Lenox Diemaster bandsaw blade 1st impressions

#4

ebd

Re: Lenox Diemaster bandsaw blade 1st impressions

ebd

Now it makes sense. I knew I was missing something. Thanks for clarifying.

Re: Lenox Diemaster bandsaw blade 1st impressions

#5

Re: Lenox Diemaster bandsaw blade 1st impressions

Barry Irby

I put the Diemaster 2 blade on my Delta 14" saw with riser this morning. Made one quick cut and had to leave for an appointment. It is a thicker blade with 3tpi. The cut looked OK, but I wish it were a thinner blade, I think. Good luck with yours. The good news is I only got one little cut on my finger uncoiling the blade.

Re: Lenox Diemaster bandsaw blade 1st impressions

#6

Re: Lenox Diemaster bandsaw blade 1st impressions

Denny

Barry, I was surprised that they only sell the 3 tpi in the thicker blade, but so far the 4 tpi blade is working out OK (though I know a lot of people say 3 tpi is best for general purpose.) I've been resawing more sapele and African mahogany, still no problems.

Wear some cheap leather gloves the next time you change a blade...

Denny

Re: Lenox Diemaster bandsaw blade 1st impressions

#7

Re: Lenox Diemaster bandsaw blade 1st impressions

Barry Irby

I sometimes take them outside and throw them into the grass to uncoil. There was snow in my yard and I did not think it was a good idea to throw it in the snow.

I did manage to coil the old one without further injury.

Wonder what the logic is in the thickness?