Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Anybody use the Work Sharp Sharpener?

Posts

Anybody use the Work Sharp Sharpener?

#1

Anybody use the Work Sharp Sharpener?

Barry Irby

A friend is loaning me his Work Sharp sharpener. It has a 1/2" wide belt and is a hand held device.

What do you think of it?

Re: Anybody use the Work Sharp Sharpener?

#2

Re: Anybody use the Work Sharp Sharpener?

John K Jordan

I have one of those I bought a few years ago. I tried it and it worked to sharpen knives, more or less. Cheap to buy and cheaply made. I haven't used it since I got a far better knife sharpener.

Re: Anybody use the Work Sharp Sharpener?

#3

Re: Anybody use the Work Sharp Sharpener?

AZ in Colorado Springs

I have a work sharp 2000 and recently received a work sharp 3000. Nice tools. I had to learn to be careful around sharp tools when I got the WS 2000 several years ago.

I have not used the knife sharpening attachment (is that what you're referring to?).

Re: Anybody use the Work Sharp Sharpener?

#4

clarification - the belt, not the disk machine

John K Jordan

Just to be clear, this is the model I referred to, made for knives. This one has the 1/2" belt. I wasn't impressed.

https://www.worksharptools.com/work-sharp-knife-and-tool-sharpener.html

The model 3000 is an entirely different type of machine:

http://www.worksharptools.com/sharpeners-34/ws3000.html

I have never tried this type.

JKJ

Re: Anybody use the Work Sharp Sharpener?

#5

Re: Anybody use the Work Sharp Sharpener?

Ralph Lipeles

It seems to me to be a lot of money for a small amount of sharpening capability. I use my 1 by 42 belt sander. It always has a worn 320 sanding belt which seems do do a good job bringing the keen edge back on a knife that has not been neglected. I use a coarser belt, 80 or 100, when I have to re edge a neglected or damaged knife edge.

Re: Anybody use the Work Sharp Sharpener?

#6

Re: Anybody use the Work Sharp Sharpener?

Jay Lombardo

I have the Work Sharp Ken Onion version and like it very much. I never could quite get the hang of consistently getting a knife sharp. Sometimes good and sharp sometimes just frustrate myself. With this machine all my knives are consistently sharp and only takes a few minutes to keep them that way