Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

FWW article??

Posts

FWW article??

#1

FWW article??

Tom Norton

Wondering if anyone might be able to he me out. I am looking for an article from FWW Issue #151. It is about building a Bow/Frame Saw.

If someone has it would you be willing to scan an email it to me?

tnorton770@yahoo.com

Thanks!!!

Re: FWW article??

#2

Re: FWW article??

Mark Nowicki

Before asking others to commit copyright violations, google:

fine woodworking issue #151 pdf

It should give you a link to Russian website where that issue is available for download.

Good luck!

PS. Another option is to sign up for a free (that is the magic word, right?) trial.

Probably cheaper than driving to the library.

http://www.finewoodworking.com/2001/10/01/build-a-bowsaw

Re: FWW article??

#3

Re: FWW article??

William Duffield

As Mark points out, due to copyright protections, I can't tell you I have the images you want and will send them to you. If I did, do you have an application that will display screen capture images in .tiff format, or would someone need to convert them for you.

Perhaps a more important question: Why do you desire that particular bowsaw design? I would recommend you start with Paul Womack's design, instead. Ask Google to find "bugbear bowsaw" for you. Bugbear started with an antique bowsaw, originally laid out in imperial units, and reverse engineered it to metric. I have a set of plans that I converted back to imperial units, which drastically simplifies the measurements.

Re: FWW article??

#4

Re: FWW article??

Tom Norton

Thanks for the Bugbear link. I have the plan downloaded.

Re: FWW article??

#5

Re: FWW article??

William Duffield

Here is a better link to BugBear's bowsaw page:

http://www.oocities.org/plybench/bowsaw.html

Note that he mentions the bowsaw I built, and provides an outdated link. The problem is I don't have a website; never did; probably never will. I do have photos and plans of my windlass. Here is a teaser, but I would have to email you the plans, since the file size is more than 100Kb.


Re: FWW article??

#6

Re: FWW article??

Tom Norton

William, thanks for the info!

Another question. A source for blades? Also if you wish to use a shorter blade how would you cut it down?

Re: FWW article??

#7

Re: FWW article??

William Duffield

I use old broken bandsaw blades. If they are too long, you can cut them off with an abrasive cutoff wheel on a Dremel or angle grinder, or score them and bend them back and forth a couple times. Problem with offering more specific advise is there are lots of different steels and heat treatments used on different bandsaw blades.

Note that I have two different stretchers for my bowsaw. I think one is 12" and the other is 14", to match various saw blade lengths (e.g., the hacksaw blades I usually keep loaded in the bowsaw). If you radius the ends of the stretcher (convex) and put a matching concave radius in the arms, it makes it easier to accommodate small differences in the length of your blades. I use the largest drum on my spindle sander for the arm radii.

You could also build a small bowsaw designed to hold coping saw blades, similar to the one by Brian Buckner on BugBear's archived web page.

Re: FWW article??

#8

Re: FWW article??

Bruce, a MN Galoot

Tools for Working Wood. Joel sells turning saw blades

Re: FWW article??

#9

Re: FWW article??

Don Stephan

Malware Bytes Pemium keeps flagging www.oocities.org as malicious.

Re: FWW article??

#10

Re: FWW article??

William Duffield

Have you considered switching to MacOS?

I downloaded the BugBear Bowsaw file and converted it to .pdf and didn't get bit by either oocity or malwearbytes.

Re: FWW article??

#11

Re: FWW article??

T.M. Stock

TFWW has plans on the site for building their 12" blade saw, as well as a few pages of information on construction details, options, woods, etc. - a lot more than the FWW article presents. Joels also sells the components of the saw (handles, pins, blades in 10,16, and 24 tpi w/ pined ends, etc.) for those that don't have much in the way of metalworking capability. IMS, Joel based the saw design on the saws in the Seaton and Phyfe tool chests - nice looking saws that look pretty swank, even if all they do mot of the time is decorate the shop.

If I was replacing either my 1970's vintage Marples or the shop-made version, I'd consider gussying it up with one of William's tensioners. Heavy waxed dacron twine out of my ditty bag full of sailmaking and repair gear has held up well on both saws, as well as a larger frame saw, but TTFW carries new, unwaxed twine in a number of colors, including the ever popular neon green.

Re: FWW article??

#12

Re: FWW article??

William Duffield

The problem with my tensioner is, if it is not tight enough, you have to turn it a full 360° to the next stop. It would be better if you could tighten it in 180° increments to adjust for more optimum tension between the blade and the arms. That design change would require the slot in the paddle to be extended to run the length of the paddle.

I'm using waxed linen twine in my bowsaws. It has held up very well for several years. I originally tried braided Kevlar (mostly as a joke, since it should be obvious that it would be orders of magnitude stronger than the wooden arms), but it is too brittle, and eventually failed, one strand at a time, wherever there was a sharp bend.