Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Building a Bluetooth speaker

Posts

Building a Bluetooth speaker

#1

Building a Bluetooth speaker

Howard in Toronto

Has anyone here built a Bluetooth speaker?

If so, what type of components (tweeter, mid, bass etc) did you use and where'd you get them. I'm thinking veneer on (you guessed it) MDF.

Also, does anybody here know of good resources such as forums etc.

Thanks.

Howard

Re: Building a Bluetooth speaker

#2

Re: Building a Bluetooth speaker

Tom dunlap

Instructables.com

Someone must have made one

Watch out if duct tape is used for construction or 'ultimate' is used for the description

Re: Building a Bluetooth speaker

#3

Re: Building a Bluetooth speaker

Howard in Toronto

Thanks Tom.

Sorry to be so thick but I take it duct tape and ultimate are not good words, right?

Re: Building a Bluetooth speaker

#4

Re: Building a Bluetooth speaker

John C Lucas

I just built the blue tooth speaker kit from.Rockler. comes.with all you need. Oc course mine was turned.

Re: Building a Bluetooth speaker

#5

code words

Tom dunlap

So many Instructables are submitted by people with limited shop skills and tool access. Enthusiasm runs wide too

Example...The ultimate duct tape and cardboard kayak!!!

Lots of good ideas though

Re: Building a Bluetooth speaker

#6

Re: Building a Bluetooth speaker

John McGaw

What sort of sound quality are you expecting to get out of it? What sort of electronics do you intend to use (real power output, frequency range, distortion)? I'd suspect that a coaxial or triaxial speaker targeted at the auto replacement market would suffice for casual use if only modest power is available. These can be relatively inexpensive i.e. <$60 to insanely expensive i.e. >$250.