Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Spray gun question...Bill Tindall????

Posts

Spray gun question...Bill Tindall????

#1

Spray gun question...Bill Tindall????

Barry Irby

Bill, On your advice I bought a deVilbiss spray gun with a No 30 tip. (I think). It has a tiny cup and is syphon feed. the cup is so small it annoys me.

Is it possible to buy an adapter that allows the use of 3M's collapsible cups? Is that what you use? You remove the syphon tube and cup cover and install the adapter, right???? Then you can snap on the plastic cups? Will the syphon feed gun collapse the cups?

I have seen the adapters online, but did not know what they were for. I may still be wrong. I looked at them again, but do not see devilbiss listed in the applications.

Re: Spray gun question...Bill Tindall????

#2

Re: Spray gun question...Bill Tindall????

E Phillip Smith

You will need to buy an adapter to allow you to use the 3M PPS cups. Once you do you will not go back.

3M has a web site which gives the specific adapter you will need when you specify the gun that you have. See link below for 3M site.

http://www.3m.com/3M/en_US/company-us/all-3m-products/~/All-3M-Products/Automotive/Painting-Equipment-Supplies/Paint-Spray-Equipment/PPS-/Adapters/?N=5002385+8709313+8711017+8711441+8719367+8743680+8743749+3294857497&rt=r3