Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

5 July 2017

Good Evening / Morning Everyone,

I'm getting an early start on posting as I have things to do early in the morning. :)

The LOML and I got away for a couple of days. The first time we've gone out on our own in several years. It was much needed to relax, sleep in, and eat out without having to cook, clean, or wash dishes. Really nice and we'll have to do that again before too long.

It's been raining and storming here off and on a good bit and with it being hot and near 100% humidity all the time, it's really hard for me to get the get-up and go...to get in the shop and sweat all over everything. ;)

We cooked out for the 4th of July and celebrated the LOML Jr's birthday as well. Food, family, and fun....how could I ask for more!!

That's it for me, so what did YOU do this Independence Day weekend?

Best of weeks to you all!

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Re: WC Weekend Accomplishments....

John C Lucas

Spent the day just playing in the shop and cleaning up. Ive decided to start photographing work for some of my former clients. Ive been buying gear and working out ways to set it up and work. Will have to use the table saw as my shooting table. Turned several bowls because a guy brought over some wood that had to be turned immediately. I dont turn many bowls because they are hard to sell but it was fun making them.

Re: WC Weekend Accomplishments....

#3

Disaster of 17

Gary Smyth

Hard to imagine that four things could go wrong in one long weekend. Nobody hurt, but a royal PIA otherwise.

1. The pressure relief valve failed on the water tank. Not a big problem but with all the warnings on the tank about the danger of a bad relief valve installation if you’ve never done it before and my other reliable sources pretty much unavailable I really was tempted to call a (holiday rate) plumber. Cost: $20

2. Then the dish washer refused to fill. I know the problem, but getting a part late July 3 was impossible and reaching it to do the repair is truly something I do not want to do. A new dishwasher is out of the question. Family picnic rapidly went to outdoor grilling, paper and plastic. Possible cost $140 if repair person.

3. While adjusting the accordion style “wings” on a window air conditioner I raised the window sash a tad too much and the air conditioner plummeted to the ground when I made a correction and tripped on the cord which twisted the AC in the window, raised the sash even more and I now have a 50 pound hold down—that is after I dig it out. Replacement at least $80

4. A can light bulb did not light. Got a replacement. Installed the bulb – nothing. After several futzes eventually found out that the threaded collar in the socket connecting the can to the switch split. This is the female socket that any retrofit male plugs into. Now in a search for a Triboro 14573 high temp socket with a heavy collar. Can’t find a replacement anywhere. For the price of a socket I may have to replace an original construction can light, which may mean tearing out the can. If new socket $2, if replacement $30 but lots of time

Luck and coordination was not my main suit this weekend. Stuff happens, but now I have a week’s worth of crap work and no little expense just to get back to normal' If anyone can find me a source for the socket please advise.


Re: WC Weekend Accomplishments....

#4

Re: Disaster of 17

John K Jordan

Yikes! Look on the bright side - things can only get better!

JKJ

Re: WC Weekend Accomplishments....

#5

Re: WC Weekend Accomplishments....

John K Jordan

Drove to Macon, GA for son's wedding. Took 308 photos. Wife and I celebrated our 47th anniversary on the same day.

Snatched some just-hatched baby guineas from the warm nest of a very angry and aggressive mama guinea hen.

Built a custom circuit to sound a very loud alert in my new little 4wd farm truck if put into gear with the parking brake engaged. The Kubota factory's design is a tiny idiot light on the dash. Unacceptable.

Turned a bit of Cocobolo on the lathe.

Suffered through eating some fresh blueberry pie, courtesy of our bushes and the Best Cook in the southeast. A terrible job but somebody has to do it.

JKJ

Re: WC Weekend Accomplishments....

#6

Re: Disaster of 17

Hank Knight

Invest in there stock market, quick! You've used up all your bad luck!

Re: WC Weekend Accomplishments....

#7

Re: WC Weekend Accomplishments....

Keith Newton

Yea JK, my sympathies on that last part. I torchered my milk allergy by eating some homemade ice cream on the 4th, clinging to the belief of that which don't kill you makes you stronger.

This was the last gallon and a half batch for the freezer. A tiny hole wore through the canister letting saltwater into the mix. I think I may have bought that freezer around 1975, so I'm sure I got my money's worth out of it over 40+ years.

Re: WC Weekend Accomplishments....

#8

Challenged

Mark Mandell - Gone Round In New Jersey

"Dad, can you make BBQ chicken like Granpa used to do July 4th?"

Whoa, this was a 5-6 hour affair (he had "well done" done pat).

Line the pan with foil, mix BBQ sauce with a like amount of tomato puree add equal amounts of hot sauce & blackstrap

Warm the grill to hold at about 200°

Do sauce and parts in the pan covered in the grill for 3-4 hours turning every 30 min.

Remove the meat and increase the heat to 400+ to reduce the sauce. Brush the sides of the pan/foil to dissolve the charred sauce every 15min.

When reduced by 60% or better return the chicken and drop the temp as low as it'll go with the pan uncovered. Roll the pieces to keep them well coated.

My kids took their first bite and exclaimed "I know this chicken!"

I nailed it.

Granpa is gone but not forgotten, and his chicken lives on.

:D

Re: WC Weekend Accomplishments....

#9

Re: Disaster of 17

Barry Irby

It's been a long time, but I replaced the fill valve on my dishwasher. As I recall the new one did not actually fit in the old spot so I just connected it to the piping and left it loose under the dishwasher.

One the can light....how about getting one of the LED replacement kits for it and modifying it to work in the existing can?

I thought bad luck came in 3's. You going for the record?

Re: WC Weekend Accomplishments....

#10

Working on it

Gary Smyth

The bad socket is the hardwired female. All the retrofits use a male pigtail to fit to that socket. If I can get a alternate socket I'll wire it in as it latches into a "holder" to keep the heat away from the metal can attached to the joist. Nothing is easy. With newer LEDS and reduced heat I may be able to get away from isolating that socket in the center space of the can. I'll see if a replacement socket can be located first.