Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Painting PVC

Posts

Painting PVC

#1

Painting PVC

Joe Pack

How well will canned spray paint adhere to PVC pipe that has been thoroughly cleaned with alcohol or acetone or such? Is there such a thing as paint that really is designed to adhere to PVC/plastic? I know various cans say their paint will stick to wood, metal, water, air, sunbeams....but do they really bond to the plastic or just form a weak surface coat? Making a project for my granddaughters who LOVE pink and purple, but really want something that will retain the color. Otherwise, I'll stick with the white.

Re: Painting PVC

#2

JL

Re: Painting PVC

JL

Krylon and Rustoleum make spray paints for plastics. I would advise using them.

I made a set of PVC stands for a woman who used them to display wares (art and art hangings) for her display booth. That's what I used.

I wiped w/ acetone and lightly scuffed w/ 220 grit sandpaper and then sprayed. It has held up for numerous setups and take downs.

Re: Painting PVC

#3

Re: Painting PVC

John Foster

We used Krylon Camo paint ten years ago on the new vinyl windows in our board and batten shed. This was to give them a subdued "mossy" look. Seems to be lasting very well.

Re: Painting PVC

#4

Re: Painting PVC

Mark Mandell - Gone Round In New Jersey

Clean and roughed (220 or 340 grit) is the key. Take the shine off.

Re: Painting PVC

#5

Re: Painting PVC

Dave Bair

How do you get the sanding dust off? Static cling with this stuff is epic.

Re: Painting PVC

#6

Re: Sanding PVC

Mark Mandell - Gone Round In New Jersey

Wet Paper towel seems to work fine for me.

Caveat: "Sanding" I referred to is a light rub by hand with 220 or 320 grit; just enough to take the factory shine off the surface. Can't say I had a problem with static.