Fixed my Dewalt Planer - Finally
Bart S Goldberg
Thought I'd share a story about my recent experience in trying to fix my Dewalt DW735 Planer. Several years ago, I decided to upgrade my planer with a Byrd Shelix cutter head. I did this before there were any Youtube videos showing me how to do this. I did have some help. My friend Dave Pollack, a professional woodworker, help me with the upgrade.
After we were done, we have some left over parts. Not a good sign, i know. But the planer was working and continued to work for several years. However, it was very noisy.
Just recently, I started having problems with the drive belt falling off. First time it happened, I just reinstalled it. 2nd time it happened, I decided to take a closer look at why it kept falling off.
I noticed that the cuttterhead pulley was very loose on the shaft. It could move almost a 1/4 inch side to side. Not good. I removed the nut and the pulley from the cutterhead shaft, and realized that there was something missing. For the cutterhead pulley to be in alignment with the drive pulley, it had to be shimmed to the outside of its moveable range.
I then go online and search and find a video of someone installing a new cutterhead on my model of planer, and got so see what the pulley arrangement should look like. Its then that I realize I am missing a spacer.
I had kept all the left over parts from my upgrade and lo and behold, I found that missing spacer. I installed it yesterday, and now the planer works great, and is alot less noisy.



