Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Finishing Magnolia

Posts

Finishing Magnolia

#1

Finishing Magnolia

Jack Prescott

I am in the process of trying to finish some shoe horns made from magnolia. The wood is white, sanded very smoothly, and was really easy to work with and shape. Testing various stains, etc. indicate a rather random grain which is very "blotchy" to say the least. Question, what is some advice on how to finish the magnolia to minimize the "blotch"? I am trying a couple of coats of tung oil to seal the surface and then apply a red oak stain which seems to minimize the "blotch.

Re: Finishing Magnolia

#2

Re: Finishing Magnolia

Dick Coers

I'm just wondering why you need stain on a shoe horn? Just celebrate what nature gave you!

Re: Finishing Magnolia

#3

Re: Finishing Magnolia

Don Orr

I believe a thinned coat (1 lb. cut or less) of dewaxed shellac is often used as blotch preventative. Zinnser shellac in the spray can is dewaxed and pretty thin.

Re: Finishing Magnolia

#4

Re: Finishing Magnolia

Keith Newton

If your stain uses mineral spirits for thinner, you can just wipe the wood down with a heavy coat of thinner, followed by the stain while it is still wet. This keeps the stain from quickly soaking up too much stain in the most absorbent zones faster than the lesser zones.

This might even work with alcohol or water base, though I haven't tried it, but would be easy to test on a scrap.