Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Carter bandsaw tires

Posts

Carter bandsaw tires

#1

Carter bandsaw tires

Denis Chenard in Ottawa

Hello all,

After 20 years the tires on my 14" Delta bandsaw (28-275C I believe) needed replacement. I purchased Carter tires only to find out that they are quite a bit thinner than the original ones. I don't dare running a blade on the new tires since any misalignment in the tracking would put the blade in contact with the wheel rims (with the old tires the rims were flush with the tires), not a good thing IMHO.

Any hints/solutions?

Thnx,

DC

Re: Carter bandsaw tires

#2

Julian

Re: Carter bandsaw tires

Julian

Does Carter have any different tires that are wider? I purchased Carter tires for my 14" Rikon (about 2 years ago) and did not have any problems with the width of the tires. Might be a good idea to give Carter a call and ask them directly.

Re: Carter bandsaw tires

#3

I believe he is saying...

Brian Roberts

the problem is the thickness....not the width,.

Re: Carter bandsaw tires

#4

It's actually both

Denis Chenard in Ottawa

The Carter tires I got were 7/8" wide (I need 1 inch) and were about half the thickness of the OEM tires, so I returned them.

Haven't checked Carter's site (do they have one?), we'll see...

Thnx,

DC

Re: Carter bandsaw tires

#5

Re: It's actually both

John in Lutz

I bought carter tires for my 14 Delta. Although they tell you they are 7/8" wide I just figured they would fit. They did not the saw needs tires 1" wide. I bought 14 X 1 inch Urathane tires from Peachtree USA and they work great.

http://www.ptreeusa.com/bandsaw_tires.htm

Sadly just tossed the Carter product.