Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Looking for info....Delta/Rockwell factory wiring

Posts

Looking for info....Delta/Rockwell factory wiring

#1

Looking for info....Delta/Rockwell factory wiring

Brian Roberts

I am looking for a wiring diagram for a factory wired Delta (model 28-200) 14" bandsaw with the work light.

I have wired many machines...both 115V and 230V....so am well familiar with how to "get it running" properly and safely.....so (no offense intended) but I don't need explanations of the many "ways to do it".

This 45 year old saw came from the factory with the work light and the retractable caster set.....quite rare to find a saw with both.

The original 1/2 hp motor (which was included in the sale to me) was swapped for a 1 1/2 hp motor. The replacement motor (230V) and the light (115V) are now each wired separately with 20 ft cords.

I intend to rewire the saw....and I want to return it to factory configuration.....whether I put the original motor in or not makes no difference.

If anyone has a diagram and/or pictures and/or an accurate description of a machine as the factory would have wired it please help me out.

Did they wire the light into the circuit with the motor....or did the motor and light have separate plugs?

Thanks!

Re: Looking for info....Delta/Rockwell factory wiring

#2

Re: Looking for info....Delta/Rockwell factory wir

Bill Tindall, E.Tn.

My Delta ancient Delta drill press running 110 has two plugs for light and motor, while the ancient scroll saw has a single plug for light and motor. So no help from what I have.

Don't remember details but I can get you started. The Old Woodworking Tool (OWW.ORG?)site has a link to a location where just about any manual for Delta and Powermatic machines of any vintage can be found. Maybe one of these manuals will show wiring.

If all else fails I have a friend that restores these kind of machines and he would know. This person says that a motor up to 1.5 HP can be run at 110V making wiring straightforward for one plug......but that may or may not be original.

Re: Looking for info....Delta/Rockwell factory wiring

#4

Thanks Bill...and Bruce

Brian Roberts

I have been all over The Vintage Machinery site and found many wiring diagrams....none with the lamp.

Bill...any info from your friend is welcome.....thanks.

I wonder....did the light "kit" as an add-on come with installation instructions that referenced wiring options?

I wonder also....when ordered with the light from the factory did "they" install the light prior to shipping.

Maybe the light was shipped with a plug attached.....?

Does it really matter......nope.....just curious....and I enjoy putting "vintage" machines back to "factory original" just because it makes me smile to look at them when finished!

Re: Looking for info....Delta/Rockwell factory wiring

#5

Re: Thanks Bill...and Bruce

Bruce, a MN Galoot

Then I suggest you join OWWM and post your question there. Someone is bound to know. It's a great site.

Re: Looking for info....Delta/Rockwell factory wiring

#6

I asked

Bill Tindall, E.Tn.

Friend says old machines usually have suffered wiring modifications and he doesn't know what original would be for this machine, though he guessed single plug would make most sense, unless the light was an add on like my drill press light and not a built in like my scroll saw light with its single plug. When he restores he does so to modern standards and convenience with no regard for authentic original.

Re: Looking for info....Delta/Rockwell factory wiring

#7

Thanks Bill...

Brian Roberts

I kind of figured that ....ultimately.....about any way I do it would be "correct" depending on the original circumstances.

Just was hoping someone might dredge up an old wiring diagram that included the light.

Re: Looking for info....Delta/Rockwell factory wiring

#8

So...is it possible

Brian Roberts

to see how your scroll saw is wired?

I would guess it's wired in parallel in the circuit.....prior to the main switch?

Certainly would not be in series....which would run current for the saw through the light.

Re: Looking for info....Delta/Rockwell factory wiring

#9

Jim DeLaney, Austintown, Ohio

Re: Looking for info....Delta/Rockwell factory wir

Jim DeLaney, Austintown, Ohio

My new Powermatic 14" saw - in effect a modern clone of your old Delta/Rockwell - has the light wired in before the power switch so that it can be used before starting the saw's motor. The light itself has a switch on it (a 'twist' switch on the bulb housing/shade).

Re: Looking for info....Delta/Rockwell factory wiring

#10

That looks like a nice saw.....

Brian Roberts

Thanks Jim!

The Powermatic looks like a beauty....really wish I could afford it....it has all the bells and whistles.

Have you had it long enough to make a judgement as to quality?

The reviews online look like lots of problems.....especially with the blade tensioner and wheel alignment being off especially with the riser block...(inability to get blade to track top of crown on both wheels).

Re: Looking for info....Delta/Rockwell factory wiring

#11

Jim DeLaney, Austintown, Ohio

Re: That looks like a nice saw.....

Jim DeLaney, Austintown, Ohio

It IS a nice saw. I got it during the recent 10% off sale that Powermatic had, and it came with the riser kit. I won't be installing the riser, since I also have a bigger saw (Laguna) for that type of work.

Assembly was straightforward, with no problems, other than wrestling (alone) with the weight.

Tracking the blade - I only use 1/8 ~1/4 inch blades on it - has posed no problems. As for tensioning, it's the same as for any other of the 14" saws, and hasn't been a problem. The saw came with the Carter Tension Release, although to be truthful, I leave the tension on all the time.

This saw replaced a 37 year old TaiChi version of essentially the same saw, but which needed all new bearings, new (better) guides, new tires, and a new motor, which was why I replaced it with the Powermatic. The only time I ever took the tension off the old saw was for blade changes, and it never caused problems. I figure that the new saw will outlast me, since (at 72) I won't las another 37 years like the old saw did. ;-)