Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

03 Apr 2017

Good Morning Everyone,

The LOML and I are doing some upholstery work for a friend and I'm doing a bit of chair repair in the shop before the new material gets applied to the chair. I have several projects I need to get done but my time is very limited with the day job work leaving me little time to hit the shop. Now with spring being here and it's time for yard work, garden work, and taking care of the MIL and my mother. I struggle now days to find the time to do the things I need to do as well as the energy and motivation to make it all happen. I'm just struggling.

The LOML is sick and I'm doing full time house work, laundry, food prep, dishes, and more. I'm just exhausted to put it plainly. Enough of my complaining. :)

I'm still learning how to cook and I am doing my best to push myself out to the shop when I'm already tired.

That's it for me, so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Alan Young

Re: WC Weekend Accomplishments....

Alan Young

Hi Dennis-I enjoy your Monday headings every week. Sorry about the stresses -I'm afraid there are too many of us that can relate to your situation--FWIW-I'd like to see pictures of your upholstery project. I have two big commissions that I have been working on. at some point one of these will move to my son's place because he has room for me to work. In the meantime I am working on an Arts and Crafts Sideboard and a Dutch Pullout Dining Table.


This is the base for the Arts and Craft Sideboard.



Here are sections of the base for the Dutch Pullout table. These pieces are loosely clamped-not glued at all---




Re: WC Weekend Accomplishments....

#3

That's a bunch of mortises

Bill Tindall, E.Tn.

How do you cut M&T joints?

Re: WC Weekend Accomplishments....

#4

Alan Young

Re: That's a bunch of mortises

Alan Young

Bill-All those joints are Loose tenon joinery. I did all the mortises on my router table with a 1/2 inch straight bit. I'll try to get some pics later. The base for the side board is all glued up. The walnut pieces for the Dutch Pull out table aren't glued at all-yet

-Alan

Re: WC Weekend Accomplishments....

#5

Moved my 85 year old Mother to assisted living

Dick Coers

Moved Mom into a private assisted living apartment. Here's a warning for you, it costs $3,300 a month! Memory care is going to be about double that! I think I better talk to an insurance agent for myself!

Now starting to go through the 70 years of accumulation at her home. Found the "Just Married" sign from their wedding in Aug 1942. Also found a Metropolitan Map of Chicago from their honeymoon. Our son is quite the Chicago historian since he's moved there, he's going to love that! So you have an idea of just how much is there! Here's another interesting question, ever burned at 40 year old recliner? No wonder people died from dropping a cigarette when they fell asleep. That thing went off like a barrel of diesel fuel with a little gasoline on top! Damn fire actually roared! Clean burning since the flames were so intense!

Re: WC Weekend Accomplishments....

#6

Finished a small cabinet

Denny

The good news is that I finished this small cabinet for the kitchen.



The bad news is that it makes all of the kitchen cabinets look pretty sad, and I'm hoping to avoid redoing the kitchen.

Denny

Re: WC Weekend Accomplishments....

#7

Grill info

Gary Smyth

The picture is difficult to expand as the detail softens with the increase in size. Is the grill custom? Expanded metal? CNC cut? Chinese style mitered wood? Also what is behind. glass? If you would. a close up of the doors and details please.

Re: WC Weekend Accomplishments....

#8

Re: Grill info

Denny

Gary, the grill is wood, Japanese style kumiko, fit by hand (chisels and jigs). It's mounted on Thai Unryu paper, which is mounted on top of plexiglass. I used General Finishes high performance water-based top coat to glue the paper down. Fine Woodworking had an article on how to do kumiko back in December(?), and there's a great book, Shoji and Kumiko Design Book 1 by Desmond King.

Here's a closer photo:


Denny

Re: WC Weekend Accomplishments....

#9

Nice work

Bill Tindall, E.Tn.

I never risk taking photos of my joints that close :)

Re: WC Weekend Accomplishments....

#10

Thanks!


Re: WC Weekend Accomplishments....

#11

Re: Grill info

Gary Smyth

Nicely done. I have two unmatched "shutters" purchased long ago for a idea that never started and continue to collect dust. This provides new thought as to what is possible. Never thought of shoji style paper as a backing. Thanks

Re: WC Weekend Accomplishments....

#12

Ellis Walentine

Very nice

Ellis Walentine

I'll bet Toshio would like this. If you work in this style a lot, or not, you ought to have a member gallery here. Link at left.

Ellis Walentine, Host

Re: WC Weekend Accomplishments....

#13

Re: Very nice

Denny

Thanks, I'll work on the gallery, probably take a day or two.

Re: WC Weekend Accomplishments....

#14

Re: Finished a small cabinet

Jim Dillon

Denny, that is really nice. I saved that recent issue of FWW because I want to try that. It looks so neat. I did our entire kitchen and never want to do another. You don't realize how many pieces of wood are in a single cabinet let alone a whole kitchen what with all the drawers etc. And keeping the pieces sorted and finding the room to assemble the cabinets was far more involved than what I had anticipated. But once done, I (and my wife) were happy campers. Thanks for posting. Jim

Re: WC Weekend Accomplishments....

#15

Re: Finished a small cabinet

Denny

Jim, thanks. The "suggestion" for new kitchen cabinets was to build them all including kumiko details. I'm exhausted just thinking about it. Working on the kumiko is fun on small projects, but I can't imagine taking on a whole room.

Re: WC Weekend Accomplishments....

#16

Re: WC Weekend Accomplishments....

Ken Kimura

Hang in there Dennis. It sounds like you could use home care service to give yourself a break. Your MIL and Mother may even be eligible for Medicare coverage. I used the service of a private in home care for my wife when her MS progressed to restricting her to a wheelchair with limited use of her hands. When I worked, I hired a care person from an agency at a fixed hourly rate, minimum of 4 hrs was required but it was flexible on days. Meal prep, cleaning, laundry or whatever helped out. Also there are caregiver support groups that help you deal with the emotional aspects of caregiving. Don't think you have to shoulder everything.

Anyway, I haven't contributed much in a while. But I finally got around to replacing my garage work benches with benches that are more suited to my type of work. I had an old hospital door I got a long time ago. It's core is glued up fir almost 1 3/4 inches thick. It was 36 inches wide and almost 7 feet long. I cut it down to 24 inches wide and 5 feet 8 inches long and used the cut off for most of the base. Since I had the screw to an old leg vise and a quick release wilton bench vise, I incorporated the two into my shop bench. The leg vise is made from oak and the bench vise had to have a spacer cut to keep the jaw face from projecting above the bench. The bench is made from scraps but it is sturdy and I like the fact that I can beat the crap out of it. My other benches are modified saw horses based on some old Roy Underhill designs. I find I like simplicity in the shop. I'm on the small side 5'-7" so I made the table height only 32". Jaw faces are oak including the edge attached to the door. The leg vise has the dark wood jaw attached because I didn't make the clamping board long enough.

Re: WC Weekend Accomplishments....

#17

Re: WC Weekend Accomplishments....

Don Orr

Kind of late getting this posted but I had a very busy week. Last weekend was spent at the Northeastern Woodworkers Association annual Showcase and Totally Turning Symposium in Saratoga Springs NY. Spent all day Friday helping with setup. I made a couple of wooden handscrews to enter in the judging and got a 2nd place ribbon in the Shop & Tools category.There is an old vintage one behind mine.

I even ran into Ellis in the Gallery.

Re: WC Weekend Accomplishments....

#18

Re: Finished a small cabinet

Johanna Johanson

What a beautiful cabinet!

I am looking forward to trying out Kumiko. I think though, I would like to put it behind a glass panel to prevent its getting dirty from dust. Dust is a major problem here.

Re: WC Weekend Accomplishments....

#19

Re: Dusty Kumiko?

Denny

Thanks Johanna. Dust is a problem here too, but I usually don't take it into consideration. For this cabinet, I left the kumiko unfinished, just a light layer of wax. (It might get dirty but it feels really nice.)

Definitely give kumiko a try. I use a few modifications to the normal kumiko tool set to speed up the process, it goes pretty quick once you've done a few. If there's any real interest I'll try and post about it.

Denny

Re: WC Weekend Accomplishments....

#20

Re: Finished a small cabinet

Brian Holcombe

That's really wonderful Denny!

Re: WC Weekend Accomplishments....

#21

Thanks Brian!


Re: WC Weekend Accomplishments....

#22

Re: WC Weekend Accomplishments....

Yonak

Alan, please post pics when completed. It seems like they will look quite interesting.

Re: WC Weekend Accomplishments....

#23

Re: Finished a small cabinet

Derek Cohen (in Perth, Australia)

Well, I'm not showing pictures of my kitchen build now! :)

Great work Denny! I have an interest in komiko, and hope to get into it in the near future. You have done a terrific job.

Regards from Perth

Derek

Re: WC Weekend Accomplishments....

#24

Thanks Derek!