Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Tormek buffing wheel

Posts

Tormek buffing wheel

#1

Tormek buffing wheel

Josko Catipovic

My Tormek buffing wheel doesn't get much use. The grinding wheel is a workhorse, but I tend to move to waterstones for secondary bevels. Never gave the buffing wheel much of a chance.

Does it have a place (for plane/chisel sharpening) even if I'm used to polishing with waterstones? If not, has anyone found another wheel to use in its place?

Re: Tormek buffing wheel

#2

Re: Tormek buffing wheel

Jerry Roberts

My Tormek buffer doesn't get any use either. It seems to dull anything I put thru the grinding wheel.

Re: Tormek buffing wheel

#3

Re: Tormek buffing wheel

Chuck Bjorgen

I seldom use the honing wheel either. I suspect mine is pretty dried out. I generally will establish the hollow grind on blades and go directly to my stones for finishing the edge. Lately I've done this only at 250 grit and go directly to stones, bypassing regrading the Tormek stone to 1000 grit.

Re: Tormek buffing wheel

#4

I'd buy one or two

John K Jordan

Hmm...

I use my leather Tormek honing wheel every time I sharpen. The difference may be I am sharpening turning tools. I use it to knock the small burr off tools sharpened on a CBN wheel and to polish the edge of my spindle gouges and skew chisels. I do this hand-held, not with the jig as Tormek recommends.

I'm on my second one - flat wore the first out.

Anyone who wants to sell a honing wheel in good condition let me know the price by email. Or I'd trade for something, a piece of cocobolo or dogwood or a healthy chicken?

JKJ

Re: Tormek buffing wheel

#5

Re: I'd buy one or two

Ron Pemberton

Hen or roster?

Re: Tormek buffing wheel

#6

Re: Tormek buffing wheel

Josko Catipovic

Interesting; so, not much use of the second wheel for us non-carvers? Has anyone found a use for the other half of the Tormek shaft?