Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

20 Mar 2017

Good Evening / Morning,

Getting an early start for the Weekend Accomplishments as I've got a pretty busy week ahead of me and I didn't want to forget. :)

Many times, we plan and have good intentions on getting things done until life throws us a few things to change our plans and shifts our priorities to other things more important. I spent this past weekend helping the LOML put together dinner and dessert for my MIL's birthday as well as my youngest son's b-day. The MIL is now 78 and doing very well and living with us in her own apartment that is attached to our house. My youngest son turned 20 years old yesterday. He's come a long way and I'm thankful that his 2 suicide attempts were not successful in the previous years. What a blessing he still is to us today and even though I still help him deal with various stresses of depression, he's making great progress as compared to where he was just 2 years ago. I haven't done much woodworking over the last several years due to family and work, but I'm slowly getting things back together to do more woodworking once again. I just seem to be more tired now days that days in years past. I have found out that the older I get, the longer it takes me to get things done. I just can't seem to comprehend that I've slowed down that much....or has the world just sped up enough to make me appear slower.?? :)

That's all from me for now, so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Jesper, Denmark

Re: WC Weekend Accomplishments....

Jesper, Denmark

Hi Dennis,

We Do get slower time goes by, but I do not think that the World is getting any faster, but maybe more half-fast.

........enjoying the pleasant weather on the Costa Tropical in southern Spain.

Re: WC Weekend Accomplishments....

#3

Boys at the lathes yesterday

John K Jordan

Learning the joy of the skew chisel...


They drove an hour and a half one way for this.

Re: WC Weekend Accomplishments....

#4

Ellis Walentine

Re: Boys at the lathes yesterday

Ellis Walentine

If I knew it was about skew chisels, I'd drive an hour in the other direction. :)

Good on you, JK.

Ellis

Re: WC Weekend Accomplishments....

#5

Re: WC Weekend Accomplishments....

Don Orr

We had good snow from the storm last week so the wife and I did a short XC ski on Saturday in the state land near home-about 1.5 hrs. Best snow conditions in a long time. We then headed to a nearby diner to treat ourselves to lunch. Back home and into the shop to work on projects for our woodworking show in 2 weeks.

Sunday was spent at the Adirondack Sports Summer Expo in Saratoga Springs, NY(The same place as the upcoming woodworking show). I was helping and demonstrating kayak recovery, rescue and rolling in the pool. A little shop work in the evening.

Re: WC Weekend Accomplishments....

#6

Re: WC Weekend Accomplishments....

Christopher Fitch Memphis

I finished an outdoor chest this weekend. If I can, I'll post a picture in a moment.

Re: WC Weekend Accomplishments....

#7

Re: WC Weekend Accomplishments....

Christopher Fitch Memphis

Here it is...a chest for pool items. Nothing fancy. I built it similar to a six-board chest out of cedar fence pickets. I'll be interested to see how it does out in the weather.


Re: WC Weekend Accomplishments....

#8

Interior spraying...

GolfSteve in Calgary

Sprayed the vertical grain trim I'm installing in my house...also known as "the neverending project"

Finish is two coats of shellac applied in the shop followed by a quick sand. After installation in the house, two coats of Target's EM2000 waterbased varnish are sprayed in Gloss and two coats in Satin. While the overspray dust is a nuisance, there is almost no odour after a few hours of ventilation.

My spray technique must be improving. There was only one board that needed a light sanding to remove a bit of orange peel. Everywhere else was "perfect" right off the gun. Not even a single run in the corners :-)





Re: WC Weekend Accomplishments....

#9

Question......

Barry Irby

This is a slight hijack, a question about your trim. Its beautiful, BTW.

What is the beaded horizontal piece that sits on the top of the facing called? Are there proper names for all the various pieces?

Re: WC Weekend Accomplishments....

#10

Re: Question......

GolfSteve in Calgary

I'm not sure the official names, but starting at the top I call the parts the crown/cornice, the frieze (the flat part), then the bead.