Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

How do you work (long)?

Posts

How do you work (long)?

#1

How do you work (long)?

Gary Smyth

I regularly search the web for answers to questions about projects. Last Sunday, not related to what I was working on, I stumbled across an article about cleaning/repair/clutter or something similar. It had to do with some architectural work. It was well down the selection list on any of numerous searches did that day.

The article was based on a project evaluation and project management study for keeping work on track and free from distraction. Anyway, I deleted my history that night to get rid of a spam attack, and now cannot get back to the article.

The premise of the article was this. When it comes to cleaning up the tools and dross while working on a project it takes about ten seconds to put stuff back in its proper location so that it is out of the way and can be found again when needed. Most people don’t realize how little “extra” time it takes to be efficient. The article pushed hard for removing clutter to improve productivity and efficiency.

As I was working on a relatively simple woodworking repair it stuck me that my bench was chock full of stuff that I used but had not yet put away or tossed. In one two hour episode I used sawed lumber, rules, divider, tap, screwdriver, plane, sandpaper, glue and various lubricants, tape, pencils, square, drill and bits, dowel, and router—along with beverage mugs, and associated tool containers/cases, wrenches and power cords. Pretty close to of all that stuff was still on the bench, though most had no further use on the project. I was working by moving around stuff, the shop looked a mess. I Wonder if I work differently than most others.

Tuesday, when I started to clean up, it didn’t even take the estimated ten seconds to pick up an item and place it in/on the right drawer or shelf, trash or out of the shop. I amazed myself. I’m interested in how others work. Am typical or atypical? Is clutter normal for the way you work? And if anyone finds that original article, please post it or a link.

Re: How do you work (long)?

#2

Re: How do you work (long)?

Thomas Skaggs, Foothills of Mount Level

"A place for everything, and everything in its place" is cliche, but I try to abide by it. But in reality, the time I take to put things away and de-clutter tend to be ad hoc events. I am usually working on multiple projects at once. To achieve the best work flow, I find myself choreographing tasks between projects with a goal of getting multiple projects ready for finish as a group (usually spray finish). Putting something away might only take 10 seconds, but it can still be a speed bump when I'm trying to focus on the tasks at hand.

I do try not to move anywhere empty handed. If I am going by the trash can, I try to pick things along the way. But because taking time out to tidy up can interfere with the flow, I tend to leave things out and clean them up when there is a break between work sessions. T.

Re: How do you work (long)?

#3

A picture is worth...

Denny

It's usually like this toward the end of a project:


Re: How do you work (long)?

#4

Re: How do you work (long)?

Hank Knight

Gary,

I'm in the boat with you. I sometimes put tools away as I finish with them, but most of the time I just put them down on my bench and move on to the next operation. I get so focused on what's next I don't take the time to put stuff away. Consequently, my bench top gets cluttered pretty quickly. When I find myself having to clear a space to work, I'll usually take a break and clear off my bench. It really is nicer to work on a clean bench top, but the desire to move on and make progress trumps neat and organized most of the time.

Hank

Re: How do you work (long)?

#5

How ever the mood strikes me.....

Bill Tindall, E.Tn.

....and it varies. Concern over work environment is not unique to woodworking. And I responded the same then. I am always amazed that someone worries about the environment in which others work. It seems to me that everyone is smart enough to find the way they like to work best as their current mood and circumstances dictate, without counseling or criticism. If I found it helpful for everything to have a place and everything be in its place, this revelation would have occurred a log time ago through self discovery.

Re: How do you work (long)?

#6

Re: How do you work (long)?

Mike Circo

A trick I learned somewhere (maybe here)

Never leave the shop without putting 10 things away.

It doesn't matter if you just walked in to get a screwdriver, you find and put away 10 items. You'd be surprised how easy it is to find 10. Early on it's big stuff, but as time goes on, the shop gets cleaner and the items smaller. It may just be a random screw or a piece of scrap or a ruler not in it's place. I manage to always find a home for it and 9 others.

This allows me to be a bit messy while I'm concentrating on the work at hand. Having to stop and reset my mind by putting stuff away constantly disrupts my chain of thought. But by doing the cleaning at the end of the session, and continuously over time, the shop gets cleaner without that overwhelming feeling.

Re: How do you work (long)?

#7

two kinds of woodworkers

Joseph Piotrowski

the ones who workbench looks like Roy Underhill's on his PBS show and the other i think is a myth like unicorns :)

although Brian Holcombe pics/vids are so neat he maybe the OCD woodworker.

Re: How do you work (long)?

#8

Re: How do you work (long)?

Hank Knight

Mike, you make a good point. I should have added to my post that I almost always stop, tidy up and put stuff away at the end of the day. It makes the next morning much nicer - walking into a clean shop at the start of the day is way better than walking into yesterday's mess. Occasionally, however, I'll work to exhaustion, so it's all I can do to disengage and drag myself up the stairs. On these occasions the first thing I do the next morning is to take a few minutes to clean up so I can start afresh.

Re: How do you work (long)?

#9

Re: two kinds of woodworkers

Bruce, a MN Galoot

The scariest belonged to a guy who used to post on the handtools side, David Barnett (who, I believe, has since passed). His workshop looked better than most surgical rooms, white and absolutely pristine.

Re: How do you work (long)?

#10

Re: A picture is worth...

Bruce, a MN Galoot

Is that a shot of your bench or did you sneak into my shop? :D There should also be some long clamps leaning against the bench.

Re: How do you work (long)?

#11

Re: How do you work (long)?

Bruce, a MN Galoot

I have a tendency to clean at the end of a project, although if things get out of hand I stop and put stuff away. It really does help and I usually don't follow my own best intentions.

When I'm on a roll I don't like to stop, even to declutter.

Re: How do you work (long)?

#12

How I Cook

Mark Mandell - Gone Round In New Jersey

is same in the shop.

All the "prep" work gets done and the prep/shaping tools get cleaned and put away so I've got maximum work space available. Not that I'm a clean freak by any definition, it's just that I hate it when I can't find to tool I need "now" because it's buried under 6 other things or a pile of shavings I made beforehand.

I do NOT, however, paint silhouettes or outlines of tools around the joint. ;)

Re: How do you work (long)?

#13

Jack Guzman from Maine

Re: How do you work (long)?

Jack Guzman from Maine

I tend to end up just like you with a completely cluttered work area. In the heat of the build ,as someone else said,foremost in my mind is the next step. Putting away what I previously used doesn't come up til I take a break and notice the mess.

I recently started to rearrange my shop. I have tools and hardware on shelves that I haven't used in years.I've been gradually removing unused items and finding better ways to stow items I use often. In the process I'm starting to clean up my work area as I work. Maybe I can set a trend for myself where this becomes habit.---Jack

Re: How do you work (long)?

#14

I do it the other way around....

Barry Irby

I put ten things away upon entering the shop. Might be tiny things, but ten things. Sometimes more, maybe while I'm thinking of the task at hand. It might be a tool I need to maybe turn a screw on the lawn mower, but I put ten things away. It helps, but does not any where near complete the job of clean up. Once in a while I just have to do a serious clean up.

Re: How do you work (long)?

#15

Clean the shop about every 10 years

Dick Coers

Whether it needs it or not!

Re: How do you work (long)?

#16

Beware these shop killers (long)

jessecloud

Like myself, most of my pals are getting on in years. What worries me is that I have a few friends who seem to have lost the battle of keeping the shop clean. Their shops have become cluttered and unworkable beyond their abilities to correct.

I think there are a few dangers lurking we should be aware of:

For many, the slope got slippery when they allowed family to "temporarily" store things in their shop. Often those were things left when family members passed and the survivors didn't want the stuff, but couldn't bring themselves to dispose of it.

Another common thread was a disaster. Damage to the shop's roof rusted and ruined much of a friend's shop. Two years later he still thinks he is "going to find time to clean it and fix it up" - but I doubt it.

And beware those unfinished projects. They accumulate quickly. Its not a sin to abandon a project if you lose interest or have other priorities, but get it out of the shop!

Seeing those ghost shops motivated me to do a serious clean up and throw out. Its not immaculate by any means, but it is well maintained and comfortable to work in.

Re: How do you work (long)?

#17

I think I read it here at WC

Tom Pilsbury (Chicago)

Somebody once said that if you want to keep your shop neat, when you finish using a tool "Don't put it down. Put it away." I try to keep to that method of work but alas, I most often wind up pushing myself into a tiny corner of the workbench because it is full of tools, rags, workpieces, cutoffs, glue bottles, clamp, etc., etc., etc.. You get the idea.

Re: How do you work (long)?

#18

Re: How do you work (long)?

Kevin French

I'm not fanatical about returning tools to their storage place, at least until the project is done or when moving on to another phase.

I work with 3 guys that are absolute pigs, the boss included. When I do work there I have to clean out a spot to work, find the tools to do the job, and when I'm done make a habit of cleaning everything and putting all the tools away.

Fortunately I'm retired and work there part time, on my schedule and have walk out because of the mess.

In my current small basement shop I have to keep things picked up or I can't move, let alone work.

Re: How do you work (long)?

#19

Re: two kinds of woodworkers

Mark Hennebury

Sorry to hear about David Barnett. When did he die?

Re: How do you work (long)?

#20

Re: two kinds of woodworkers

Bruce, a MN Galoot

No one knows anything for certain. He was a prolific poster here and on SMC and hasn't posted anything for a couple years. He had suffered a stroke, and he frequently remarked on his poor health. A friend of mine found an obit of a David Barnett from the area where he was known to have lived.

Re: How do you work (long)?

#21

I'm with you Jesse ...

Mike Farinella

especially the part about unfinished projects.

Re: How do you work (long)?

#22

Re: two kinds of woodworkers

Mark Hennebury

That's too bad, i really enjoyed David posts, he was very intelligent, had a great sense of humor, very perceptive and always willing to engage in an intellectual debate. He made me laugh and forced me to read the dictionary to understand his well thought out and well worded arguments.

He was a breath of fresh air, that i missed when he left WoodCentral.

I am sorry to hear about his passing.

Mark Hennebury.

Re: How do you work (long)?

#23

Re: How do you work (long)?

Ron in Sterling, CT

Every person has different habits. On most occasions I tend to clean up at the end of a work session, or day. Clean up to me means putting the tools away that are laying around and a quick sweep if the floor is really messy. This leaves the shop in a "ready to go to work" condition when I return the next time.

Re: How do you work (long)?

#24

The art of a clean shop

clay foster

Some are born to have a clean shop, and others are called to it. Some of us even answer the call.

I haven’t always been a clean shop keeper. Oh, I always wanted one, but not enough to actually do it. I was attracted to the concept, but not the reality. The logic of efficiency and safety always ended up being sacrificed on the altar of urgency, the rush to see to fruition the project at hand. A broom was not a tool that fit my hand as well as one that flung wood chips to the farthest reaches of space.

But life has been a long upward spiraling journey to know its essence, the essentials, the elemental core. The further I traveled on the journey, the more I realized the necessity to jettison non-essentials, pare away the superfluous, and leave excess baggage behind.

This applied to my work as well, the art and furnishings that I was compelled to make for both satisfaction and livelihood. I learned that when a design was not quite right I was better off taking things away until it worked rather than adding more bags and pouches. Reduction, not addition, has been my touchstone.

And eventually this applied to my shop as well. The convenience of tidiness was not as important as the reduction of visual clutter. The safety of a clean environment was not a motivation, but the elimination of anything that stood between me and a purer involvement with what I was making and living. The two aspects were merging into one life style. My shop became cleaner and tidier, my life became simpler, and my work acquired a greater depth and presence.

I don’t believe that what I make in a clean shop is inherently better than the work made by some one who’s shop looks like an explosion at a thrift store. I do know that my work made in a clean shop is better than my work made in a mess. It’s a choice, and not one for every body, but one I’ve learned to live with.

Re: How do you work (long)?

#25

Re: How do you work (long)?

John Pappas

My daughter gave me a small plaque that reads, "Organized people are just too lazy to look for things." Does that suggest to you how I keep my shop? :)