Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Air dried Walnut

Posts

Air dried Walnut

#1

Air dried Walnut

Bill P.

My dad had some walnut trees cut down about 4 years ago. They were cut in widths from 3-15 inches and at 11/4 inches thick. They have been stacked and covered outside since then. Will it be ok to use them without being kiln dried. I don't have any big projects planned for their use, only a wall hung display case for a rifle at this time.

Thanks, Bill

Re: Air dried Walnut

#2

Re: Air dried Walnut

Yonak

Bill, the "1 inch per year" rule of thumb for air drying isn't necessarily true in all cases. The best way to determine if the wood is dry is to get a moisture meter to the middle of a board.

Re: Air dried Walnut

#3

The important question is...

Bill Tindall, E.Tn.

..can I use them before they are dry? No, for most furniture.

It doesn't matter how they get dried.

If you live in Arizona they are already dry. If you live in a place with 40" of precipitation and winter, they most surely are not, nor will they ever be piled outside.

Drying is simple to understand. Wood will equilibrate with the relative humidity of its surroundings. You can find tables on the Internet correlating humidity and moisture content. How low you need to go depends on your design skills and experience and what you are building. Commercial specification is 7%. You will never get there without heat.

How quick it equilibrates depends mainly on temperature. In a kiln, its fast. Under you bed, slower. Up in a loft, somewhere in between.

If you have a good scale you can best determine moisture content with it and the kitchen oven.

Lumber that thick is hard to dry reliably. I don't recommend taking it to a kiln for there is a good chance they will dry it too fast.

Re: Air dried Walnut

#4

Re: The important question is...

Bill P.

Hey Bill, I hear you about drying too fast. The only local place that kiln dries has some nice lumber but I think most is dried too fast. When I work it I have to do it in stages due to the fact that it seems to be stressed. I'm assuming it is case hardened. I have yet to own a meter but it is on the list. How good ($$$) do you have to go to get a nice meter.

Re: Air dried Walnut

#5

Re: The important question is...

Bill Tindall, E.Tn.

I rarely used a meter. Sounds odd but I could feel the lumber and tell if it was dry enough. Feeling shavings was even more sensitive. When pressed I usually just did the oven dry testing.

If you are set on buying a meter I have a professional Lingometer pin style meter I'll sell for $100 post paid. I don't need it any more.

Re: Air dried Walnut

#6

Any bugs in the sapwood?

Dick Coers

As you break down the pile, look for dust and 1/16" diameter holes. Any signs of powder post beetle, then it needs heat treatment before being used!

Re: Air dried Walnut

#7

Re: The important question is...

Bill P.

I'll keep that in mind Bill for when the time comes around. We've been spending money on boring stuff like a new roof and a new back porch. I can't wait for the fun stuff. I'll be in your neighborhood this July. It'll be our 5th year vacationing in the Smokies. Them there are some darn nice mountains you got thar. :)

Re: Air dried Walnut

#8

Bill .....

Brian Roberts

If the sale is open to anyone I would be happy to buy it from you.

Thanks,

Brian