Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Design Help

Posts

Design Help

#1

Design  Help

eliot feldman

I have been asked to make an entrance hall table. I happen to have an interesting slab of wood to work from and could use some design suggestions, if you would be so good as to advance any.

What's interesting about the slab, which is about 30 x 16 x 3 inches, is that it was cut through the trunk of a maple tree perpendicular to the long axis of the trunk. In other words is all end grain with a fair amount of the

circumference still having the bark on -- but the bark is not on all the way around; and it's not round. It is more or less rectangular, with the bark on the curved part of one of the short ends.

Personally, I think it's kind of heavy for such a table, but I suppose that could be a good thing if handled properly.

Any ideas?

Re: Design Help

#3

Alan Young

Re: Design  Help

Alan Young

A few years ago I was asked to build bases for three Slabs of Redwood. This is what I did. Black Painted Poplar worked as a nice solution.





Re: Design Help

#4

Re: Design  Help

Don Stephan

Make an author search on the Fine Woodworking site for William Macy to see how he made a platform and sled to mill a surface flat and smooth. Flip the slab and repeat. It's time consuming, but you could keep going to make the slab thinner. ROS sanding will be needed to remove the router bit lap marks, and you might consider using a 1" diameter bit (fewer tracks) and a new bit for the last thin pass on each side.

Re: Design Help

#5

Re: Design  Help

eliot feldman

Beautiful work; and it gives me some ideas. I must think about the shape for the base, but the black against the polished wood of the top has an elegant look.

Re: Design Help

#6

Re: Design  Help

Joseph Mulherin

Eliot, would it be possible for you to take it to someone who has a large band saw and have it sawn down the length so you could have bookend boards 1.5" thick. That way you could make two tables and still have the look of the bark ends you mentioned. I like the other guys table legs and the black color sets it off.

Re: Design Help

#7

Re: Design  Help

Don Stephan

Are all of the portable band saw mills horizontal blades? If so, width and operator skill may be the only limiting factors. Great suggestion!

Re: Design Help

#8

Re: Design  Help

eliot feldman

Actually, I was thinking of exactly the same thing because I didn't care for the bark on only one of the shorter ends, and I felt that 3 inches would be too thick and heavy. And I happen to have a large band saw with a one inch blade in it. Still, I'm not exactly comfortable cutting (for the first time) a re-saw of this size.

Re: Design Help

#9

Look

Mark Mandell - Gone Round In New Jersey

for someone with a Woodmizer band mill. A good guy is liable to have a finer blade to do exactly what you want. Just make sure you've got one face of that slab that is flat to use as the reference surface.