Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Type of Wood for a Pizza Peel

Posts

Type of Wood for a Pizza Peel

#1

Type of Wood for a Pizza Peel

AZ in Colorado Springs

A friend wants to make a pizza peel (for putting pizzas into wood fired ovens). What type of wood to use? I found a few illustrations online but can't identify the wood. Also found a few websites selling them, but they don't identify the species, either.

Re: Type of Wood for a Pizza Peel

#2

JL

Re: Type of Wood for a Pizza Peel

JL

My preference would be a relatively non-porous wood.

Birch, maple, cherry, etc.

You probably aren't going to find anything that is 14-16" wide - so you would have to glue it up anyway.

Re: Type of Wood for a Pizza Peel

#3

Re: Type of Wood for a Pizza Peel

John in NM

I don't think it matters much. I've seen them made of baltic birch plywood even.

I made one from incense cedar, because it's what I had an appropriate scrap of - 16" by 30" or something like that, with some big knots that would get cut out carving out a handle.

If I were starting from scratch and gluing it up, I would probably go with something like birch or maple.

Re: Type of Wood for a Pizza Peel

#4

Ellis Walentine

Re: Type of Wood for a Pizza Peel

Ellis Walentine

I think most of the ones you can buy are glued up from, say, 1 1/2" - 2" wide strips to get the width and to ensure flatness. Otherwise, it's going to be hard to find wide enough pieces of quartersawn stock to stay flat with changes in the weather. Diffuse porous wood would be preferable.

Ellis

Re: Type of Wood for a Pizza Peel

#5

Re: Type of Wood for a Pizza Peel

Dave Nichols

I made mine from poplar scraps

Re: Type of Wood for a Pizza Peel

#6

Basswood

Bill Tindall, E.Tn.

The commercial ones are basswood, but anything will work. You don't want it to weigh a lot and it needs to be stable.....hence basswood. You need to so some substantial thinning around the edge so something that caves well makes this step easier. Again, basswood. I have made a few and staying flat was never a problem. Maybe that is why drawing boards were basswood.

I like multitaskers.....I use a cookie sheet.

Re: Type of Wood for a Pizza Peel

#7

Re: Type of Wood for a Pizza Peel

Tom Pilsbury (Chicago)

A pizza peel was one of my very first projects, when I was learning how to use my tools. I got the plan from ( I think ) Wood Magazine. It's made from Cherry and Maple. Finished with Mineral Oil. You can probably tell it gets a lot of use. I loves me some pizza!


Re: Type of Wood for a Pizza Peel

#8

Re: Type of Wood for a Pizza Peel

Barry Irby

I made one years ago similar to Tom's, at least the materials. Scraps. Any close grained wood. I tapered the "blade" by running it through my lunch box planer on top of a wedge. Also used a Performax to sand it. I sanded the tip of it too thin and it split. 1/16" thick glue joints don't hold up well. The blade on mine is about 12" square.

I have made half a dozen others for friends. A friend came up with a big commercial one at an auction. I cut it done to residential size for him.

Re: Type of Wood for a Pizza Peel

#9

Ellis Walentine

Idea book

Ellis Walentine

A.J. Hamler, a regular contributor here, has just published a book through PopWood Books called The Woodworker's Kitchen, and a small (9" x 24") peel project is included. AJ's writeup reflects most of the wisdom already discussed in this thread, including using non-porous wood, laminating using waterproof glue and alternating growth rings on adjacent boards to help counteract any tendency to cup. AJ used cherry and maple for his.

Ellis

Re: Type of Wood for a Pizza Peel

#10

Re: The Woodworker's Kitchen *LINK*

William Duffield

If you want to buy the book, PopWood doesn't make it easy! If you go to popularwoodworking.com, there is no link to their book sales, and their search engine only finds blog entries, not items for sale. To my way of thinking, that's not a very efficient way to run an online business.

Here's the link to A.J.'s new kitchen book:

http://www.shopwoodworking.com/the-woodworkers-kitchen-paperback?utm_source=popularwoodworking.com&utm_medium=referral&utm_campaign=pww-sfa-bl-171010

It appears that there are a lot of similarities between building a pizza peel and a canoe paddle. Of course, the peel doesn't require all of the durability and strength of a paddle.

Re: Type of Wood for a Pizza Peel

#11

Re: Idea book

John K Jordan

Excellent! That activates my book genes. I see it is available on Amazon, too. There are only three reviews there so far which are typical: they range from "Great book" to "Not worth the money"

Edit: ok, I ordered one. I assume WoodCentral still gets a few pennies if we go to Amazon through the link at the left, right?

JKJ

Re: Type of Wood for a Pizza Peel

#12

Ellis Walentine

Right you are. Thanks.