I had to cut down an oversize hollow core door and fill in the gaps left. I used all of my 12" and under clamps. I still had to route out the center pressed wood and put in a spacer but decided to do that after the initial glue up. Just for interest sake I counted my clamps. I have 143 and still could use some more.
You are correct Dick but I didn't have any boards that long. I keep a set of cauls that are 4 feet for gluing up panels. I had these clamps 5 feet away so it was just easier to just grab them.
I did something similar when I replaced all bypass closet doors in our house a few years ago. I mostly just had to cut them to length and glue in a solid piece.
I have plenty of very cheap spring clamps I made from 4" Sch. 40 PVC pipe. I cut it in rings 1" wide on the bandsaw and cut one kerf across for the jaws. You could make them from 5" or 6" for a bigger grip, or from DWV for less spring pressure, or cut them narrower for less spring pressure or wider for more.