Tea House Chair: Posts and Spindles
Brian Holcombe
Good morning! I'm riving away on my chairs, please have a look at the latest round of work performed;
As I always I very much look forward to your comments.
Knowledge You Can Build On — Est. 1998
Tea House Chair: Posts and Spindles
Brian Holcombe
Good morning! I'm riving away on my chairs, please have a look at the latest round of work performed;
As I always I very much look forward to your comments.
Re: Tea House Chair: Posts and Spindles
Paul Leuba
The posting on your blog of the spindle and post fabrication is informative and very well done. I do have a question regarding the making of the reamer tool. It's not apparent in the pictures or from the explanation what holds the reamer blade securely in the kerf cut in the tapered stock. Would you please explain how this is accomplished?
Re: Tea House Chair: Posts and Spindles
Brian Holcombe
Hi Paul,
Thanks for following along with my blog. Excellent question and one I had myself as I researched the project. The blade is held in place simply by the holder. Both the blade and holder are drawn toward center in the cut, so no additional device is required.
Cheers
Brian