Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Manual for the Reliant Jointer #DD38

Posts

Manual for the Reliant Jointer #DD38

#1

Manual for the Reliant Jointer #DD38

Brian Connelly

I recently got a Reliant Jointer #DD38 but it has no manual. Does anyone know where I may get one, a copy or something?

Would appreciate hearing from anyone.

Thanks,

Brian

Re: Manual for the Reliant Jointer #DD38

#2

Re: Manual for the Reliant Jointer #DD38

Dick Coers

You might post a picture of the machine. It's likely it's the same as Grizzly and many other brands.

Re: Manual for the Reliant Jointer #DD38

#3

Re: Manual for the Reliant Jointer #DD38

Ray Newman

Try here??:

http://www.owwm.org/index.php?sid=43a71b725456cae3ddef9806f2294a70

Re: Manual for the Reliant Jointer #DD38

#4

Ellis Walentine

Re: Manual for the Reliant Jointer #DD38

Ellis Walentine

Hmm, actually Reliant was not one of the many Taiwanese brands that shared manufacturers, so it could vary from some of the others. If/when you get your hands on a manual, let us know.

Ellis

Re: Manual for the Reliant Jointer #DD38

#5

I guess I was thinking about these

Dick Coers

I know this is a thickness planer, but thinking about this Reliant line of machines.


Re: Manual for the Reliant Jointer #DD38

#6

Ellis Walentine

Re: I guess I was thinking about these

Ellis Walentine

My memory of this stuff has faded some, but the guy who owned Reliant was based somewhere else in Taiwan, not in Taichung where almost all the other brands, including Grizzly, Jet, Enlon, Delta and others, were manufactured. There were differences, I recall, although I don't doubt that a lot of components were sourced from the same suppliers.

I used to have debris files on all this, but I think they all got the heave-ho years ago.

Sic transit...

Re: Manual for the Reliant Jointer #DD38

#7

I have a manual for DD39C6"

Gary Smyth

I imagine that the machines are at least somewhat similar. The manual is about 14 pages but is faded. I made a copy to test the diagrams and with some manipulation the result is less than perfect but readable.

I attempted to scan a page but could not transfer from the printer to my laptop. I might need some assistance for that. There are other ways to get it done but before I do, are we talking apples and apples?

Reply here or to email.


Re: Manual for the Reliant Jointer #DD38

#8

Re: I have a manual for DD39C6"

Brian Connelly

Gary,

Thank you for your response. I saw the picture that you posted and the one I have looks just like the picture.The additional information that I read off the jointer itself says that it was manufactured in 1996. I'll be honest with you, I purchased this many years ago and never used it, I dug it out of my garage and copied the info off the unit itself. I do hope to use soon.

Let me know if you want anything from me to cover your time copying the manual and thanks again!

Brian

Re: Manual for the Reliant Jointer #DD38

#9

Good find.  All's good my end.