Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

The Danish modern series.#1

Posts

The Danish modern series.#1

#1

The Danish modern series.#1

Marc in Mass

This is my first run of 5 sets using various size, wood, design, and joinery disciplines. My build woods were curly ash, walnut, and where pulls were used it was ebony or a curly ash/walnut turned pull.

Re: The Danish modern series.#1

#2

Re: The Danish modern series.#1

Gary Smyth

Marc,

Beautiful work. The suite appears to be exceptional. I would like to see more close ups of the joinery. Danish Modern is not my preference, but your work is a credit to the style.

I do have a question on the design of the small tables. From certain angles they look to be ghostly reminiscent of the Black and Decker Workmate tables. Did that have any influence on your design?


Re: The Danish modern series.#1

#3

Re: The Danish modern series.#1

Marc in Mass

LOL! No, but I see a family resemblance. The leg shape was pretty much my own and these two end tables really needed a couple inches longer stretchers to give the base a wider stance to look stable with that length top. The workbench look is accidental. I remedied that design flaw in the future sets.

Re: The Danish modern series.#1

#4

Re: The Danish modern series.#1

William Duffield

The resemblance is uncanny. I assume that any influence would have been subconscious. Maybe that's why I like the form, even though Danish Modern is not my cup of tea, either.

I would be very concerned about the structural weakness of the short grain in the legs, especially the walnut ones. If I wanted to build tables like these, I would use bent laminations or steam bending for these components.

Personal preference: For filling the loose knots in the walnut coffee table top, instead of the turquoise Inlace, I would use pigmented epoxy, either black or a brown that was at least two shades darker than the darkest natural color in the walnut. Note that there are only a couple of pixels in one of your photographs that provide a clue that you might have used Inlace.

Re: The Danish modern series.#1

#5

Re: The Danish modern series.#1

Frank orfanello

This isn't a style I'll usually like but boy are these nice looking.

You've done beautiful work.

Re: The Danish modern series.#1

#6

Re: The Danish modern series.#1

Marc in Mass

Well. there are 15 of these tables in various homes around Ma. and there has yet to be a structural issue with any of them. These legs are pretty tough. I leave open knot holes and other defects in the piece if they are not butt ugly and cannot be improved by judicious carving. I don't fill anything. If it's too bad I don't build with it. Most small knot holes add character to the piece.

Re: The Danish modern series.#1

#7

I haven't checked yet.....

Bill Tindall, E.Tn.

but I hope some of these pictures show up in the WoodCentral Gallery

Re: The Danish modern series.#1

#8

Gorgeous!

Howard in Toronto

I think the exposed joinery is a great idea.

The observation re grain direction is a valid one - I appreciate you letting us know you've had no failures.

Keep em coming. More pics of other jobs!

Howard

Re: The Danish modern series.#1

#9

Re: The Danish modern series.#1

Derek Cohen (in Perth, Australia)

Interesting designs, Marc. Nicely done. I am very partial to this clean, calm, and uncluttered look, and have built a few pieces along these lines.

Can you say something about the joinery and building process?

Regards from Perth

Derek

Re: The Danish modern series.#1

#10

Re: The Danish modern series.#1

Dick Coers

I agree with Derek about the clean, calm, and uncluttered look of Danish modern style. So still undecided about mixing the woods. I think it might be the use of mixes make my eye stop instead of flow around the design. A solid colored base and a solid colored top may flow better for my eye, but just my opinion. Very nice craftsmanship.

Re: The Danish modern series.#1

#11

Re: The Danish modern series.#1

Bill Tindall, E.Tn.

I agree on the mixed woods. Mixing adds novelty, but often I find a mix distracting.

Re: The Danish modern series.#1

#12

Re: The Danish modern series.#1

William Duffield

That one is beautiful, too.

It would be almost criminal to not use the wood in that table top because of the knots. Whether to leave them open, fill them with an opaque filler or a clear filler is a decision that you have to make on an individual table basis. If it were going to collect spilt beer and pretzel crumbs, then I would fill it with epoxy, but otherwise leaving the knots open works for me.

If you don't think someone will fall on the table, then I approve of your leg design, but I don't think I would use it for a step stool. I've been guilty of building (and repairing) tables in older styles whose designs were even more notorious for failures due to short grain, e.g., three-legged candle stands.

Re: The Danish modern series.#1

#13

Re: The Danish modern series.#1

TomD

Wow, you have arrived when you come up with your own style (workmate aside, :))

So:

1) I kinda like how you mated the top to the bottoms, but it might look a little unfinished. Alternatives are exact same process using those figure of 8 metal brackets. They would be nearly invisible. A possibility would be hardware bond directly into the top. Then it would look like they grew together, and after the big nuke exchange you can be sure at least one part of your work will survive. Downside is that there is some risk of crossgrain issues, but maybe not that high.

2) On the different woods:

a) maybe it makes them walk off the floor and into customer's cars, you know best about that;

b) if it doesn't then are you getting paid for all the trouble? One of the reason why Maloof used basically 1+ 1 woods was because on efficiency it was a lot easier to stock basically just walnut. Same thing with Beckvourst and his cherry Shaker stuff. As you know, if you stock one colour, you need all sorts of sizes and grains, for show and structure. It's like you need to stock 5-10 categories, just to do the one colour. It not too quickly gets to be something you aren't being paid for.

c) Just as one doesn't wear checks with checks, when you have a pretty shapely design, you want your design genius to show up. Selling the wood is what people who don't have their signature style do.

d) you are asking people to like all your choices in the context of their home decor options, it may just cancel out your sale.

Re: The Danish modern series.#1

#14

Re: The Danish modern series.#1

TomD

Those of you who remember Excaliber saws and such, may not know J. Phillip had a tool showroom, full of very juicy Japanese tools, displayed on beautiful cherry trestle tables with beefy tops that terminated in glued breadboards. One night he was in his office doing his accounts when there was a loud bang like a gunshot in his showroom. One of the 7 foot tables had split end to end. Eventually they all did, and the cracks were sorta ornamental given the general Nakashima vibe to the place. But sooner or later that tends to be what happens. A lot of the fancy mid-century stuff used plywood/veneer on the big pieces, which no doubt saved them some headaches.

As a result, when I started my woodworking I did raw ends saturated in epoxy (looks like any other finish) instead of breadboards.

Re: The Danish modern series.#1

#15

Very Nice!!

Thomas Skaggs, Foothills of Mount Level

Hey, I like them them a lot. Interesting design and even sweeter with the beautiful wood. Nice joinery too. Well done and cool!

T.

Re: The Danish modern series.#1

#16

Mixed woods, leg strength, and design points.

Marc in Mass

First I want to really thanks you all for your welcome critiques, suggestions, and multiple statements of appreciation. This is the series first test under fire from people who know what they are talking about. A piece of furniture or woodwork does not have to have universal appeal. It has to please the customer first and the maker second. Well, I have NO customers. I do not build to sell. Everyone who owns any of my pieces are relatives, friends, or accidental recipients of them. Rarely do I sell anything. I build for fun not profit. Not to say I would not take a commission and I have. But not often. The multiple woods in a piece are because I find that more attractive than one wood only. I have LOTS of wood so using it up in not happening. Many species. Rarely do I build in one wood only. About the cross grain weakness of this particular leg design. The only place any cross grain weakness could become an issue has a massive tenon running all through the cross grain area. I can't find any undue weakness there. I fully understand these problems with wood and always find ways to eliminate them. I worked with this leg design for years and have 30 or more templates of every configuration I have tried. I have moved on now and am building a series of boxes to get used to small builds with fine detail.

Re: The Danish modern series.#1

#17

Re: Mixed woods, leg strength, and design points.

Thomas Skaggs, Foothills of Mount Level

Well said man. Rules are made to be broken as long as you figure out the right way to break them! Rock on.

T.

Re: The Danish modern series.#1

#18

Re: Mixed woods

Bill Tindall, E.Tn.

"The multiple woods in a piece are because I find that more attractive than one wood only." I understand that thinking without agreeing with the result.

File away in the recesses of your mind the possibility of one day building one of these pieces in calm grained defect-free walnut or mahogany where the onlooker would see at first glance only the graceful shape of the piece and not the details of the wood. Krenov was a master of this kind of design. Most of his pieces were in perfect calm grained pear and the like so their graceful shapes dominated the appearance.

My guiding philosophy, for what little it is worth, is fancy wood on plain design and plain wood on fancy design, to avoid gilding the lily. The Renaissance masters carved from uniform color marble, as another example.

Re: The Danish modern series.#1

#19

Aside, Check out the furniture in...

Barry Irby

the Progressive ad. The one with that stupid Box and the woman Psychiatrist. I know almost nothing about Danish Modern, but the set for the commercial is amazing.

Re: The Danish modern series.#1

#20

beautiful looking but..

Joseph Piotrowski

maybe it just seeing it with pictures vs in person but the drawers look a little distracting from the rest of the piece. i'm not sure if it the proportion of the drawer or the joints. heck maybe its the 4 cups of coffee making my eyes jittery!

still an outstanding piece of work that would look great in my living room! looking forward to seeing some more work of yours.

not a criticism just another opinion and you know how those are.

Joe p.