Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Anybody know these woodworkers?

Posts

Anybody know these woodworkers?

#1

Anybody know these woodworkers?

Marc in Mass

A while back I followed the Yellow Brick Road around this great country and made a few stops here and there where there were friendly WC'ers holding Montanafests, big gatherings in Blaine Wa, and various woodshops in various cities. The trip lasted 77 days and covered 14,455 miles. I did manage to record most of the trip and will post the WC related pics of interest for us. Here is a teaser.

Re: Anybody know these woodworkers?

#3

Re: Anybody know these woodworkers?

Gerry in North Surrey

Yo Marc That would be Dave Sophusson aka Sophie and I believe the lady is Carol, The Router Lady. Photo taken at one of Sophie's BBQ's in Custer, WA when a bunch of the Ponders used to get together sometime in the 90's.

Gerry, who used to sign on as Gerry in Halfmoon Bay and the guy that brought the Chilliwack Jubilee corn.

Re: Anybody know these woodworkers?

#4

Re: Anybody know these woodworkers?

Marc in Mass

Yes, I was one that was there. We had a great time! Visited the Grizzly showroom, had an awesome planked fish BBQ, and turning exhibitions, etc. Wonderful gig. And a it was a week after Montanafest that I also attended.

Re: Anybody know these woodworkers?

#5

Ellis Walentine

I know them

Ellis Walentine

Here's a shot of that wonderful planked salmon, just before we devoured it.


And here's a group shot:


Lots more pictures of that day, and of Montanafest, are lurking around in one of my hard drives. I have enough memories to last a lifetime.

Ellis

PS, if you open the group shot in a new tab, you can see it at the full edited size of 1200 px wide.

Re: Anybody know these woodworkers?

#6

Re: I know them

Gerry in North Surrey

Good food, good booze, good company, good times.

Gerry, who has nothing to add.

Re: Anybody know these woodworkers?

#7

Re: I know them

Steve jenkins

Good time had by all. I went to all of Sophie's and hosted several here in Dallas

Re: Anybody know these woodworkers?

#8

Re: I know them

Marc in Mass

Hi Steve.� I remember a huge woodshop in Texas that I visited on the trip. I was more than impressed with your work and shop. Just seeing your name brought a lot back to me. Hope you are well and still making.

Re: Anybody know these woodworkers?

#9

Still working

Steve jenkins

Moved out to 5 acres in the county and built a 3300ft shop. Love it but miss the stop-ins. I'm about 30 minutes north of Dallas now

Re: Anybody know these woodworkers?

#10

Way OT, salmon question

Bill Tindall, E.Tn.

I grill salmon about every other week. I just slather the skin with oil and plop it on the grill, skin down. The skin gets more or less charred and the rest cooks to perfection. I don't eat salmon skin so I don't care how it turns out. I just dig the meat of the now stiff skin.

What is the benefit of plank cooking? It seems to be the trendy way to cook, but I don't understand the benefit?

I have no shortage of planks. I suppose I should try it but I might miss some not obvious detail.

Re: Anybody know these woodworkers?

#11

Re: Planking

Mark Mandell - Gone Round In New Jersey

There are numerous recipes, but the basic concept is using indirect heat on a hot fire to cook. I use red cedar or eastern white cedar that I resaw from lumber, but I've found that mesquite can work as well. Since I work on a gas grill, I saw the wood thin (1/4-3/8") and soak it in water for several hours: charcoal needs a thicker plank. I also marinate my fish.

Fish gets done skin-side on the wood with thin lemon, lime or onion slices on top. It absorbs further flavor from the wood's extractives and gets pulled when it just flakes. Depending on the guests, I may return the fish to the grill, skin to the fire, to crisp it as some really like the crisp skin.

Re: Anybody know these woodworkers?

#12

Re: Way OT, salmon question

jessecloud

Adds a subtle flavor to the fish - and not trendy! Its been around for a lonngg time. I've been doing it for

about 40 years.

Re: Anybody know these woodworkers?

#13

Ditto

Mark Mandell - Gone Round In New Jersey

More like 50 years, and Mom before me. ;)

Re: Anybody know these woodworkers?

#14

Re: Planking

Steve jenkins

You can do a similar method with possum using a different selection of spices and wrapped in bacon. The big difference is you throw away the possum and eat the board.

Re: Anybody know these woodworkers?

#15

I Heard It

Mark Mandell - Gone Round In New Jersey

You eat the bacon and pitch the rest in the crick.

Re: Anybody know these woodworkers?

#16

Plank Cooked Salmon

Gerry in North Surrey

This method of cooking salmon was used by Alaskan, British Columbian, Washington, and Oregon Coast Indians, First Nations, Native Americans, (pick your politically correct term) from before their recorded history to preserve food. The salmon (and other meats) were attached to a CEDAR board and then teepee stacked around a fire and slowly cooked. I believe that they believed that the cedar imparted some preserving effect to the salmon as well as imparting a unique flavour to the meat.

Kla How Ya

Gerry

Re: Anybody know these woodworkers?

#17

Re: Plank Cooked Salmon

Gerry in North Surrey

I should have mentioned in my previous post that the cedar plank was invariably a Western Red Cedar plank. Makes a difference, you know.

Gerry

Re: Anybody know these woodworkers?

#18

West Meets East

Mark Mandell - Gone Round In New Jersey

You're right about Western Red but Eastern White gives a lighter flavor. ;)

Re: Anybody know these woodworkers?

#19

If you knew more about what they ate.....

Bill Tindall, E.Tn.

...you would not eat the bacon either. When I bury the remains of killed critters in the garden the possums often find the spot after a few days and excavate it for dinner.

That said, they can be nice pets, and likely would have been domesticated were it not for the tail. I killed one eating my chickens one night and daughters rescued a baby from this mother's pouch the next morning. They raised it, as farm girls do. They would walk around the house with it clinging to their hair. It lived under the couch by day and came out in the evening, sometimes to the surprise of guests. It even went to school in their purses and slept in the locker. Girls loved it, boys didn't.

Myth: they can not hang by their tail. Daughters spent hours trying to train it to hang, with a blanket safety net below. No success.

Re: Anybody know these woodworkers?

#20

Re: If you knew more about what they use.....

Mark Mandell - Gone Round In New Jersey

Grandpa was a butcher in NY. His advice? "Never, ever eat a hotdog regardless of who makes it." ;)

Re: Anybody know these woodworkers?

#21

Re: Planking

William Duffield

Aromatic red cedar or western red cedar? Cedrol, which gives Aromatic cedar, Juniperus virginiana, its distinctive flavor, is a toxin and (at least in the state of California) a known potent carcinogen.

Re: Anybody know these woodworkers?

#22

Re: Planking

Gerry in North Surrey

Western Red Cedar. Everything in CA is a carcinogen. The First Nations of the West Coast used WRC for almost everything except food. They built their lodges, totems, and canoes with it to name just a few uses. To my knowledge, there was no use of WRC for planking in CA because there isn't any there. It was used in the range of the tree which ran from the Central Oregon coast north and west to the Alaska Panhandle.

Gerry, who thinks he's picked most of the nits.

Re: Anybody know these woodworkers?

#23

I remain skeptical....

Bill Tindall, E.Tn.

....that the plank, what ever it may be made of, does anything more than keep the skin from burning over a charcoal fire. The smoky flavor from charcoal will contribute, if not overwhelm, any smoke flavor from the plank. The skin burning is only "skin deep" and not a factor in my situation.

On a gas grill I can imagine the smoke from the plank could be significant. I do acknowledge the wow factor of presentation on the plank.

For those that plank on a charcoal fire try plank-free some time and report back. Slather oil on the skin, skin down over the coals and remove when the meat flakes. Add a dash of lemon butter and dill, and serve.

Re: Anybody know these woodworkers?

#24

Re: I remain skeptical....

Frank orfanello

So... I cook a lot of salmon. I've cooked it on a gas grill with and without a plank, on WRC and EWC but my favorite way of cooking it is on a bed of salt over a high heat.

This recipe was adapted from someone's, it's not my own.

Spread salt evenly in a dry heavy cast-iron skillet and heat over moderately high heat until salt is hot.

Pat salmon dry and season flesh with salt and pepper, lay thin sliced onions and lemons on top.

Place the salmon skin side down, on the salt and cover the pan. Just leave it to cook for about 10 mins. until it is almost cooked through. You don't need to turn it or touch it while cooking.

When you take it off the heat let it stand for a minute or 2 and it will finish cooking.

At that point you can use a spatula to remove the meat and teh skin will stay in the pan with the salt. It is delicious and moist.

Re: Anybody know these woodworkers?

#25

Re: I know them

Jim in Milton Ont

A great Day.......

Take care, Jim