Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Rapid flatening of water stones

Posts

Rapid flatening of water stones

#1

Rapid flatening of water stones

Bill Tindall, E.Tn.



I have a King that I use for kitchen knives. It was hollowed 1/8". I flooded a worn out 80 grit sanding screen with water and rubbed the stone on the screen. (these screens are used on floor sanders and dry wall sanding) In an amazing less than 5 min the hollow was gone.

These screens are silicon carbide which is harder than most abrasives other than diamond. The open mesh cuts fast. Now I have a red puddle on the driveway.

Re: Rapid flatening of water stones

#2

Re: Rapid flatening of water stones

Joe in a Cleveland suburb

That's pretty much how I flatten mine as well.

What is the technique used to sharpen kitchen knifes on water stones?

Thanks.

Re: Rapid flatening of water stones

#3

Re: Rapid flatening of water stones

TomD

Pretty much the same as anything else. Pick an angle, work the whole stone, work the whole bevel.

-----------------------------------------------------

I have a particular cement block that is flat, and just rub it directly on that, keeps them flat when they are way out. The method I use more generally is I have 2 800 stones and just rub them together, then I flatten those that are finer 1500 on 800, 4K on 1500, and so forth. Some say you contaminate the stones and you won't get good results, but I learned this method from close to the source and have had good results with it.

Of course, using techniques that don't hollow is a good practice to follow.

Re: Rapid flatening of water stones

#4

JL

Re: Rapid flatening of water stones

JL

IDK - I guess I like buying things.

When they first got offered (at a sale price) - I bought the Norton flattening stone - which is also silicon carbide. It stores neatly in the tub where I keep my water stones. I use it when needed. The grooves make sure that all the waste gets out of the way.

I still have a piece of plate glass that I used to used to flatten my stones. I would sprinkle some 120 or 80 grit silicon carbide glass with water and rub a water stone on the glass to flatten.