Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Mirror Thickness Recommendation

Posts

Mirror Thickness Recommendation

#1

Mirror Thickness Recommendation

Doug Reynolds

I am making some mirror frames and need a mirror thickness recommendation. Frames are 18" by 24". Mirrors are available in 1/8" and 1/4" thicknesses from my local shop. The rabbet will accept either and, I plan to back it up with tempered hardboard. Any reason to choose one thickness of mirror over the other? I have no previous experience and would assume 1/4" thick would be more durable. Just a guess on my part though.

Re: Mirror Thickness Recommendation

#2

Re: Mirror Thickness Recommendation

Bill Tindall, E.Tn.

If you are going to hang it 1/4" will be heavy. Personally I would use 1/8" unless there was a compelling reason to use the 1/4". For example, if the mirror is not to be hung and will be moved, the stiffer 1/4" might be less apt to break.

Re: Mirror Thickness Recommendation

#3

Re: Mirror Thickness Recommendation

Larry

I have always used 1/8

Re: Mirror Thickness Recommendation

#4

Re: Mirror Thickness Recommendation

Ralph Lipeles

I would go with the 1/8". I would also leave a little extra room around the edges to allow for differential expansion between the glass and the wood. I also use a few small scraps of foam tape to keep the glass from bouncing around.

Re: Mirror Thickness Recommendation

#5

3/16??

ronster

I'm working on a mirror frame too. Someone suggested to me that 3/16 mirror glass was an option. True?

Re: Mirror Thickness Recommendation

#6

Re: 3/16??

Larry Barrett

I built bathroom med cabinets with mirrored doors and used 3/16" mirrors. I went to a local (Rockville MD) glass company and they had it (or could order it).

Re: Mirror Thickness Recommendation

#7

thanks