Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Removing protective paper from Lexan???

Posts

Removing protective paper from Lexan???

#1

Removing protective paper from Lexan???

Barry Irby

I have some ChemCast withe plastic sheets about a 1/4" thick. Similar to Lexan with brown paper stuck to both sides for protection. My stock is about ten years old and the paper is tedious to remove. Is there an easy way to remove the paper?

Re: Removing protective paper from Lexan???

#2

Re: Removing protective paper from Lexan???

George Koch

Barry, I would try some heat. Either a heat gun or flat iron. George

Re: Removing protective paper from Lexan???

#3

Re: Removing protective paper from Lexan???

Dick Coers

I've never had good luck removing large sections. but fair luck with removing the paper as best as I can, then a WD40 soak to remove what's left.

Re: Removing protective paper from Lexan???

#4

mineral spriits

Bill Tindall, E.Tn.

At least that is what I use on Pexigals. Start a corner, then wick the solvent into the paper-plastic interface, and pull gently. When resistance is encountered add more solvent to the interface. It may require more patience than you can muster. A squirt bottle or dropper works for solvent dispensing.

Re: Removing protective paper from Lexan???

#5

caution

Bill Tindall, E.Tn.

I have never removed the paper from Lexan. Lexan is a bit strange. It has a boggling amount of internal stress in the formed products. Exposure to some solvents will craze it.

A neat experiment is to bed a compact disk (Lexan = polycarbonate) and drop isopropanol on the bend. The disk will craze so fast that it will explode in a zillion pieces.