Cleaning dust extractor bag, my approach
Grant Smith
While I spend a good deal of money on nice tools for the shop, I like to keep my overall spend as low as possible. I figured there are other like minded persons here, so I thought I'd share.
I have a Fein Turbo I dust extractor for my sander and other hand held dust makers. I bought the HEPA pleated filter, and use the Fein paper bags that look like paper grocery bags, but are more durable. Pricey little buggers, these bags.
When it is time to empty, I turn on the big Oneida DC and remove the lid from my Fein and take out the bag. I then mate the 4" utility shop cleaning line for my DC system to the bags inlet, and let the DC suckify all of the dust back out of the bag. There is usually some jostling necessary, along with a few disconnects to let the bag refill with air, but it completely cleans out the bag. It seems to even "clean the pores" in the bag so it flows better. I was able to clean out a bag maybe six or eight times before it develops a hole. To date I am still on the second of 3 bags I bought. I save about $6 each time I do this.
Even if my procedure reduces the effectiveness of the bag, I still have the canister HEPA filter to stop any dust that results.
Works fine, lasts a long time!
Regards,
Grant in Iowa



