Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Lamination Bending

Posts

Lamination Bending

#1

Lamination Bending

Larry

I'm doing some lamination bending and using Wax Paper and Cellophane tape to keep the lamination from sticking to the form.

Has anyone tried anything diffidence , maybe some type of finish or something that can be sprayed or brush on?

Re: Lamination Bending

#2

Jesper, Denmark

Re: Lamination Bending

Jesper, Denmark

Visqueene works well. So does heavy coating of wax on smooth varnished substrates, but not on bare wood forms.

Re: Lamination Bending

#3

Ellis Walentine

Re: Lamination Bending

Ellis Walentine

A heavy coat of wax will do the trick, at least it did for me when I was doing complex bends many years ago. Wax paper is good too, as long as your forms are relatively flat across.

Ellis

Re: Lamination Bending

#4

did you ever experience....

Bill Tindall, E.Tn.

....any transfer of wax to wood that interfered with later finishing?

I like the packaging tape solution.

Re: Lamination Bending

#5

Re: Lamination Bending

Gary Smyth

I have used this stuff in the past. Called mini wrap or master wrap and places like the mail houses/packaging stores use it to stabilize parts or multiple small packages. U-line stocks it--but in case quantities. I think that U-Haul stores carry it too. Pretty much sticks to itself. Glue doesn't stick and the plastic stretches to provide a tight hold. Very thin and flimsy but very strong. Because it is thin it can be a handful until you know how to wrap. Practice. Caution! Glue squeeze out can ooze inside a tightly wrapped piece. Not reusable. Wrap and toss. Comes in several thicknesses, colors, and widths in 1000 foot roll with and without dispenser handle. Not very expensive about $10 for the roll and the same for a separate dispenser handle.

Also can be used to hold doors closed and/or drawers in the carcass when transporting without residue on the piece. Handy stuff with conditions.

ls.

Re: Lamination Bending

#6

Re: Lamination Bending

Barry Irby

I have used plastic laminate like Formica as the table and as a liner for the form. And I have used packing tape and polyethylene. And I have used Johnson's Paste wax. All of them worked. Never had the paste wax interfere with the finish. The process of protecting the forms is important. The first one I did is still glued to the form somewhere in the dump.

Re: Lamination Bending

#7

Re: Lamination Bending

William Duffield

Packing tape has always worked well with epoxy for me. Both the smooth side and the sticky side release easily, and leave a smooth, clear surface. That property is, of course, much more important for filling loose through knots than it is for structural laminations, but it does mean much less clean up.

One of these hangs on the front face of my wall-hung tool cabinet. I don't have any reason to use anything else for this application.


Re: Lamination Bending

#8

What Barry said plus ...

jessecloud

I make up a bunch of extra lams, same size and shape as the real ones. One gets waxed on one side and goes on the waxed form, so the real lams never touch the form. After all the real lams are on, I add more lams on top as clamping cauls to protect the real lams from clamp marks and to spread the clamping pressure out.

The "other than real" lams can be made of any wood that is cheap and bendable.

Packing tape works well, but it has to be applied very neatly - no gaps and no overlays

Re: Lamination Bending

#9

Re: did you ever experience....

TomD

Not really though it is a concern. On stuff like paddles I never worried, there is normally enough cleanup that any contamination is gone. But having wax around is not ideal where people can get hurt like bows, planes, boats. Most of my largest laminations were vac bagged so they are inside the plastic bag anyway.

Re: Lamination Bending

#10

Ellis Walentine

Re: did you ever experience....

Ellis Walentine

Short answer: no, but not that it couldn't interfere with many finishes if not completely sanded or dissolved away. The edges of laminations generally are covered with hardened squeeze-out that has to be ground away, so there's no issue there. The faces are usually sanded prior to finishing.

Ellis