Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Epoxy for knife kits

Posts

Epoxy for knife kits

#1

Epoxy for knife kits

Terry Alexander

I'm already working on next year's Christmas presents. I'm thinking of making a few knives for some of the guys. I have 2 questions.

1. Why do Sumer kits require the purchase of a countersink and others don't?

2. What kind of epoxy should I use? If you go to a blade forum, they talk about all kinds of commercial epoxies. I'm not taking up custom knives as a new career....I just want to make a couple of knives. So, availability and price are considerations.

Thanks y'all for all your expertise.

Terry Alexander in West Texas.

Re: Epoxy for knife kits

#2

Clint Searl

Re: Epoxy for knife kits

Clint Searl

Try smooth-on.com for epoxies in small quantities.

Re: Epoxy for knife kits

#3

Stay away from 5 minute epoxy

Dick Coers

If you really want to make some heirlooms, the longer set epoxies are generally considered to be higher bond and longer lasting. I prefer West System.

Re: Epoxy for knife kits

#4

Re: Stay away from 5 minute epoxy

Terry Alexander

Can you suggest some products from this company? I really don't know much about epoxies.

Thanks in advance.

T

Re: Epoxy for knife kits

#6

Re: Stay away from 5 minute epoxy

Brian Holcombe

I'll second that, 5 minute epoxy is not so reliable in my experience.

Re: Epoxy for knife kits

#7

Nice find.  Good to know.


Re: Epoxy for knife kits

#8

Re: Stay away from 5 minute epoxy

William Duffield

105 resin and 205 or 206 hardener, depending on the temperature in the shop.

More reading on their systems: http://epoxyworks.com

Why the countersink? Belt and suspenders :) When I'm peining a brass or copper rivet into a countersunk hole in a wood knife scale, I always clamp the sides of the scale with a hand screw to minimize the chances of the wood splitting. I also wait until the epoxy has completely cured before installing the rivet. You want the rivet to work with, not against, the epoxy.

Re: Epoxy for knife kits

#9

Re: Epoxy for knife kits

TomD

Knife makers seem to use a lot of different epoxies: JB weld, Devcon, T-88, golf club shafting epoxies, accraglass. WEST G10. The west 105/205s are great epoxies, a little fiddly to use, and you may find you need some filler to make them resistant to simply being squeezed out. WEST is my go to epoxy as I build boats and have been with them nearly since they started out. But for knife handles I would probably use some pre-thickened slow curing epoxy. What I have at the moment is T-88, and West G10 for materials with a dissimilar expansion range.