Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Mortise marker question

Posts

Mortise marker question

#1

Mortise marker question

Bill Tindall, E.Tn.


Daughter (who has added several pieces of furniture to my to-do list) kindly gave me the Marples premium mortise marker , no doubt with the hope it would soon be employed on her wish list. It is nice. The head is fitted tight to the shaft which makes it easy to accurately adjust the length.

But it came with pins longer than I have ever seen on a mortise marker. They are 1/4" long. I have only ever owned used marking gauges and they had pins that barely extended above the wood bearing surface.

As received, the conical pointed pins made nice lines with the grain, and ragged lines across the grain. I ground one side of the pins slightly to flatten the point and that improved cross grain marking. But I still have these long pins. What to do, if anything else? I have not used it enough to determine if the long pins are a problem or not.

Apparently Marples makes several grades of some tools. The top grade seems to be marked "Trial".

Re: Mortise marker question

#2

Re: Mortise marker question

Sgian Dubh

There's not much to do to them if they work well enough for you Bill. Personally, I prefer the pins a bit shorter, maybe a third or 1/16" less. If it suits you to do so file them down in situ, or you could remove the brass bar with the pins in, knock them out and fiddle with them if that's more convenient. Otherwise, just use the gauge as is.

Mortice gauges aren't really designed for cross grain marking because, as you've found, they tend to leave a ragged line, and the majority of mortices (not all of course) are aligned with the long grain. But, if cross grain ragged lines work okay when required, and the tenoned part has shoulders to cover up any raggedness I can't see there being anything to worry about relating to soundness of construction. Slainte.

Re: Mortise marker question

#3

Re: Mortise marker question

Keith Newton

Yep, I've had one of those for years, but never grab it, rather picking one which has a spear point with bevel only one side. The bevel goes toward the body, so it pulls into the guide, rather than away.

Re: Mortise marker question

#4

Re: Mortise marker question

William Duffield

Of course, the pins on Bill's Marples are long enough and have enough steel in them that he could regrind them to spear points.