Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Good reason to not straighten up the shop????

Posts

Good reason to not straighten up the shop????

#1

Good reason to not straighten up the shop????

Barry Irby

A few years ago I injured a knee. The doctors gave me some exercises that involved walking around in circles and figure eights and more complicated steps to get my equilibrium and agility back.

I have a tiny shop and it's cluttered. There's the tools, TS, BS, Shaper, lathe, planer, jointer, etc, and the project, and hand tools, and cords, and the DC hose. Working in there is like some strange ballet. Reach up as high as I can to open a blast gate, hook the hose to the planer while not stepping on a cord. Close that gate and reach low for the one on the TS while stepping around the hose on the planer. Open the door to use the jointer and close it when through.

So, the exercise is good for me, right? I really should not clean up and get better organised, right? A little mess is a good thing, right?

Re: Good reason to not straighten up the shop????

#2

Great logic!

Tony - Memphis

Me too! My shop sounds like yours...no wonder all the various aches and pains... Sometimes it is frustrating,but sometimes I have to laugh.

Re: Good reason to not straighten up the shop????

#3

Absoloootly

Mark Mandell - Gone Round In New Jersey

Now, if you could just find out where all those pencils have disappeared to you'll be is fine shape.

Re: Good reason to not straighten up the shop????

#4

Re: They are with ....

Ron in Sterling, CT

all the measuring tapes. :D

Re: Good reason to not straighten up the shop????

#5

Re: Absoloootly

john lucas

Usually by the end of a good day in the shop I have gone through about 7 or 8 pencils and they are laying by each machine so all I have to do is look and I will eventually find one.

Re: Good reason to not straighten up the shop????

#6

Re: Absoloootly

Barry Irby

Back in the day, my friend and I worked our way through college building kitchen cabinets. Never could find a pencil until one day we came across somebody's box of pencils. Used pencils. There must have been a thousand. We took them and flung the entire box down through the shop. Never cleaned them up. Made a point to leave them where they fell unless they were a tripping hazard. You could reach a pencil from most anywhere for a long time.

Re: Good reason to not straighten up the shop????

#7

Pencils

John K Jordan

I solved the problem of pencils in the shop. I wrap a short piece of soft iron wire (bailing wire) around each pencil, secure with a bit of aluminum tape if necessary, and stick to a magnet at each point of need. I do this at lathes, bandsaw, etc. A pencil is ALWAYS within reach.

The magnets are good for other things. Solves the disappearing measuring tape problem too.




Where there is wood, I use the round magnets with countsunk holes for screws.

JKJ

Re: Good reason to not straighten up the shop????

#8

Re: Who Needs Magnets?

William Duffield

This fall, I was in a shop that has been in operation for many years. For most marking operations, it appears they have been using scratch awls, and specifically darts. They were all over the shop, many stuck in timbers. I guess when someone was finished scratching, they just tossed the dart at the nearest convenient target.

Re: Good reason to not straighten up the shop????

#9

Besides hearing, I thought my ears were made

Keith Newton

to hold a pencil. Even when you can no longer hear, it will still hold a pencil, so you can communicate. ha

Re: Good reason to not straighten up the shop????

#10

THIEF!!!

Mark Mandell - Gone Round In New Jersey

You stole some poor OCD victim's prized collection of used Ticonderoga's?

Have you any idea how long he/she spent seeking and then lovingly polishing, cataloging, and arranging those pieces of yellow and white treasure?

Could you not appreciate the surpassing rarity of an 1-1/2" stub still carrying its virgin eraser intact?

Have you no shame blithely grinding away those delicate incisor impressions secretly rescued from college board proctors' desk drawers?

Oh! The tragedy!

Re: Good reason to not straighten up the shop????

#11

Re: Besides hearing, I thought my ears were made

William Duffield

Tell that to Vincent Van Gogh!