Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Last coat of spar completed, now what.

Posts

Last coat of spar completed, now what.

#1

Last coat of spar completed, now what.

Bill P.

I just put the final coat of Spar Urethane on the two porch swings I made for Christmas gifts. I tried Minwax Pro Series for the first time. I sanded lightly with 220 grit after each coat per instructions but I'm not sure if something should be done after the last coat. It is smooth to the touch but not like glass. Should it be gone over with say 320 grit. What do you do the final clean up with, I was thinking Tack cloth. Thanks for any suggestions.

Bill

Re: Last coat of spar completed, now what.

#2

Re: Last coat of spar completed, now what.

Dick Coers

320 is too course for a final rub, unless you have some major issues. Spar varnish is notoriously soft, so rubbing much at this point can be problematic.

Re: Last coat of spar completed, now what.

#3

Kneale Brownson

It's outdoor furniture.


Re: Last coat of spar completed, now what.

#4

You are done

Bill Tindall, E.Tn.

After the last coat of varnish is applied to outdoor furniture, the varnish is allowed to dry and then the piece is delivered.